Belt Finder

Rounded Friction Top

Series 800
Request a Quote

Stabilize products on slight inclines and declines with the Intralox Series 800 Rounded Friction Top belt.

The S800 Rounded Friction Top belt features raised rubber modules that limit product sliding. The drive bar on its underside channels debris away from the belt, simplifying cleanup.

  • Friction Top surface thermally bonded to plastic base
  • Raised 0.16-in (4-mm) rubber modules
  • Compatible with most S800 belting
inmm
Pitch2.0050.8
Minimum Width8203
Width Increments0.6616.8
Opening Size--
Open Area0%
Hinge StyleOpen
Rod Retention; Rod TypeOccluded edge; unheaded

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • The Rounded Friction Top module is black rubber on a white PP composite base module.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • No mistracking or stick-slip effect, even on long runs. Belt is positively tracked by the sprocket drive system instead of unreliable friction rollers.
  • Thermally bonded rubber does not peel off. Friction Top surface is co-molded (thermally bonded) with the plastic base instead of glued on or mechanically fastened.
  • Rounded Friction Top module can be used with other S800 styles. Use the belt strength rating of the accompanying modules.
  • Easy to maintain and repair: Intralox reusable unheaded rods are quickly removed and installed with only minimal tools, so one can replace individual modules in minutes.
  • No tensioning required, which eliminates expensive tensioning systems.
  • Lower construction cost: Intralox sprocket drive requires far less space than a friction roller system, allowing shallow, less expensive trench construction.
  • Minimum friction indent is 2.0 in (50.8 mm) and 2.67 in (67.8 mm) alternating for every row and 2.0 in (50.8 mm) for every other row.

Base Belt MaterialBase/Friction TopDefault Rod Material, Diameter 0.24 in (6.1 mm)Belt StrengthTemperature Range (continuous)Belt MassAgency Acceptability
lbf/ftN/m°F°Clb/ft²kg/m²FDA (USA)EU MC1
Polypropylene compositeWhite/blackAcetal2,50036,500-50 to 150-29 to 662.311.252

  1. European Migration Certificate providing approval for food contact according to EU Regulation 10/2011.

  2. FDA compliant with restriction: Do not use in direct contact with fatty foods.

Series 800