Standard overlap design ensures product containment.
Fastens to belt with hinge rods. No other fasteners required.
Not compatible with Mesh Top belts
Install sideguards so the straight edge is the leading edge and the back ends are angled inward, toward the product. This is called a product-friendly orientation. On request, the back ends can be angled outward, toward the conveyor sides.
When going around the 6- and 8-tooth sprockets, sideguards fan out, opening a gap at the top that can allow small products to fall out. The sideguards stay completely closed when going around the 10-, 12- and 16-tooth sprockets.
Standard gap between sideguards and flight edge: 0.3 in (8 mm)
Minimum indent: 0.7 in (18 mm) except for Flush Grid which is 1.3 in (33 mm).
0.16 in (4 mm) thick with 0.33 in (8 mm) overlapping
