Raised Rib

Series 800

Limit product contact with the Intralox Series 800 Raised Rib belt.

Compatible with finger transfer plates, the S800 Raised Rib belt has a large open area that supports sanitation and minimizes product contact. The drive bar on its underside channels debris away from the belt for easier cleanup.

Raised 0.275-in (7-mm) ribs
40% open area for quick drainage
Unheaded, barn door–style rod retention system simplifies maintenance and installation

	in	mm
Pitch	2.00	50.8
Minimum Width	14	356
Width Increments	2.00	50.8
Opening Size (approximate)	0.51 x 0.49	12.9 x 12.4
Open Area	40%
Hinge Style	Open
Rod Retention; Rod Type	Barn door; unheaded

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Open slots improve drainage and cleanability.
Cam-link design hinges provide easy cleaning with greater hinge and rod exposure as the belt moves around the sprockets.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Fully compatible with S800 EZ Clean^™ angled sprockets.
Finger transfer plates are available.
Raised ribs extend 0.275 in (7.0 mm) above basic module with fully flush edges.

Belt Material	Default Rod Material, Diameter 0.24 in (6.1 mm)	Belt Strength		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.24 in (6.1 mm)	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Polypropylene	1,000	14,600	34 to 220	1 to 104	1.48	7.23
Enduralox polypropylene	Polypropylene	1,000	14,600	34 to 220	1 to 104	1.48	7.23