Mini Rib

Series 800

Secure products on slight inclines and declines with the Intralox Series 800 Mini Rib belt.

The S800 Mini Rib belt features raised 0.125-in (3-mm) surface ribs that support products on gradual inclines and declines. The drive bar on its underside channels debris away from the belt, simplifying cleanup.

Closed surface prevents product loss
Fully flush edges
Abrasion-resistant link design reduces belt and sprocket wear

	in	mm
Pitch	2.00	50.8
Minimum Width	2	51
Width Increments	0.66	16.8
Opening Size	-	-
Open Area	0%
Hinge Style	Open
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Closed surface with fully flush edges.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Impact resistant belt designed for tough meat industry applications.
Not recommended for product accumulation conditions. If values are required, contact Intralox Customer Service.
0.125 in (3 mm) Mini Rib on surface accommodates gradual inclines and declines.

Belt Material	Default Rod Material, Diameter 0.24 in (6.1 mm)	Belt Strength		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.24 in (6.1 mm)	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Polypropylene	1,000	14,600	34 to 220	1 to 104	1.77	8.66
Polyethylene	Polyethylene	500	7,300	-50 to 150	-46 to 66	1.87	9.13
Acetal	Polyethylene	900	13,100	-50 to 150	-46 to 66	2.92	14.26

Document Name	Document Type	File Type	File Size
S800_MiniRib_FlushEdge_4inch_(Imperial).dxf	CAD Drawing	DXF	83 KB
S800_MiniRib_FlushEdge_4inch_(Metric).dxf	CAD Drawing	DXF	88 KB
S800_MiniRib_Interior_4inch_(Imperial).dxf	CAD Drawing	DXF	112 KB
S800_MiniRib_Interior_4inch_(Metric).dxf	CAD Drawing	DXF	121 KB