| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 4.6 | 117 |
| Width Increments | 0.66 | 16.8 |
| Opening Size (approximate) | 0.15 × 0.90 | 3.8 × 22.9 |
| Open Area | 27% | |
| Product Contact Area | 15% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Perforations on polyethylene edge modules are slightly different. See inset photo.
- Nub pattern reduces contact between belt surface and product.
- Nub pattern is continuous over the surface of the belt, even over the hinges.
- Available in acetal and polypropylene.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Recommended for products large enough to span the distance between the nubs.
- Compatible with S800 Flush Grid flights only.
- Standard nub indent: 1.3 in (33.0 mm).
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 800 | 11,700 | 34 to 220 | 1 to 104 | 1.56 | 7.62 |
| Acetal | Polyethylene | 1,000 | 14,600 | -50 to 150 | -46 to 66 | 2.36 | 11.52 |
| Acetal | Polypropylene | 1,000 | 14,600 | 34 to 200 | 1 to 93 | 2.36 | 11.52 |
| Polyethylene | Polyethylene | 500 | 7,300 | -50 to 150 | -46 to 66 | 1.85 | 9.03 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S800_FlushGridNubTop_FlushEdge_4inch_(Imperial).dxf | CAD Drawing | DXF | 136 KB |
| S800_FlushGridNubTop_FlushEdge_4inch_(Metric).dxf | CAD Drawing | DXF | 151 KB |
| S800_FlushGridNubTop_FlushEdge_6inch_(Imperial).dxf | CAD Drawing | DXF | 193 KB |
| S800_FlushGridNubTop_FlushEdge_6inch_(Metric).dxf | CAD Drawing | DXF | 213 KB |
| S800_FlushGridNubTop_Interior_4inch_(Imperial).dxf | CAD Drawing | DXF | 849 KB |
| S800_FlushGridNubTop_Interior_4inch_(Metric).dxf | CAD Drawing | DXF | 933 KB |
| S800_FlushGridNubTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 1 MB |
| S800_FlushGridNubTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 1 MB |
Threaded Barrel Attachments
Series 800
Flat Top Base Flights (No-Cling)
Series 800
Tough Flights
Series 800
Open Hinge Impact Resistant Flights
Series 800
Nub Top Molded-In Sideguards
Series 800
Nub Top Base Flights (Double No-Cling)
Series 800
Heavy-Duty Edge Flights
Series 800
Bucket Flights
Series 800
Scoop Flights
Series 800
Heavy-Duty Edge Scoop Flights
Series 800
Flush Grid Base Flights (No-Cling)
Series 800
Impact Resistant Flights
Series 800
No-Cling Impact Resistant Open Hinge Nub Top Flights
Series 800
3-Piece Perforated Bucket and Scoop Flights
Series 800
Tapered Edge
Series 800
Sideguards
Series 800
Streamline Flights
Series 800
No-Cling Impact Resistant Open Hinge Flights
Series 800
Molded-in Sideguards
Series 800
