Prevent product sliding on slight incline and decline conveyors with the Intralox Series 800 Cone Top belt.
S800 Cone Top belting includes raised cones that provide superior grip, ensuring proper product orientation. Featuring a drive bar on its underside that guides water and debris away from the belt, it offers exceptional performance in direct food–contact applications.
- 2.0-in (50.8-mm) pitch guards against premature belt failure
- Closed surface prevents product loss
- Abrasion-resistant link design reduces belt and sprocket wear
- 1.3-in (33.0-mm) standard cone indent
- 0.125-in (3.2-mm) cone height
| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 4 | 102 |
| Width Increments | 0.66 | 16.8 |
| Opening Size | - | - |
| Open Area | 0% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Closed upper surface with fully flush edges.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Not recommended for product accumulation conditions. If values are required, contact Intralox Customer Service.
- Standard flights and sideguards (without cones) are available.
- Standard cone indent: 1.3 in (33.0 mm).
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Polyethylene | 900 | 13,100 | -50 to 150 | -46 to 66 | 2.84 | 13.89 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S800_ConeTop_FlushEdge_4inch_(Imperial).dxf | CAD Drawing | DXF | 94 KB |
| S800_ConeTop_FlushEdge_4inch_(Metric).dxf | CAD Drawing | DXF | 102 KB |
| S800_ConeTop_FlushEdge_6inch_(Imperial).dxf | CAD Drawing | DXF | 126 KB |
| S800_ConeTop_FlushEdge_6inch_(Metric).dxf | CAD Drawing | DXF | 138 KB |
| S800_ConeTop_Interior_4inch_(Imperial).dxf | CAD Drawing | DXF | 93 KB |
| S800_ConeTop_Interior_4inch_(Metric).dxf | CAD Drawing | DXF | 101 KB |
| S800_ConeTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 123 KB |
| S800_ConeTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 134 KB |
Split Ultra Abrasion Resistant Polyurethane (FDA) Sprockets
Series 800
Abrasion Resistant Split Metal Sprockets
Series 800
EZ Clean™ Sprocket
Series 800
Molded Polypropylene Sprocket
Series 800
Molded Polyurethane Sprocket
Series 800
Molded Acetal Sprocket
Series 800
Angled EZ Clean™ Acetal Sprocket
Series 800
Angled EZ Clean™ Polypropylene Sprocket
Series 800
CleanLock™ Sprockets
Series 800
Threaded Barrel Attachments
Series 800
Flat Top Base Flights (No-Cling)
Series 800
Tough Flights
Series 800
Open Hinge Impact Resistant Flights
Series 800
Nub Top Molded-In Sideguards
Series 800
Nub Top Base Flights (Double No-Cling)
Series 800
Heavy-Duty Edge Flights
Series 800
Bucket Flights
Series 800
Scoop Flights
Series 800
Heavy-Duty Edge Scoop Flights
Series 800
Flush Grid Base Flights (No-Cling)
Series 800
Impact Resistant Flights
Series 800
No-Cling Impact Resistant Open Hinge Nub Top Flights
Series 800
3-Piece Perforated Bucket and Scoop Flights
Series 800
Tapered Edge
Series 800
Sideguards
Series 800
Streamline Flights
Series 800
No-Cling Impact Resistant Open Hinge Flights
Series 800
Molded-in Sideguards
Series 800
