| in | mm | |
| Pitch | 0.60 | 15.2 |
| Minimum Width | 3.0 | 76.0 |
| Width Increments | 0.5 | 12.7 |
| Opening Size | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Barn door; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Two edge options available: no indent and 21 mm indent.
- Non Skid Raised Rib surface increases traction.
- Closed edges on one side of the belt.
- Small pitch reduces chordal action and the gap required at the transfer dead plate.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Minimal back tension required for sprocket engagement
- Lug tooth sprockets improve sprocket engagement and simplify installation.
- Low profile conveyor reduces the installation costs associated with digging pits.
- Finger transfer plates ensure safe transfers, eliminating the need for safety stops and reducing downtime.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Nylon | 2,000 | 29,200 | -50 to 200 | -46 to 93 | 1.86 | 9.08 |
| HSEC acetal | Nylon | 1,800 | 26,300 | -50 to 200 | -46 to 93 | 1.88 | 9.18 |
