Mold to Width Insert Roller

Series 1000

Ensure safe product accumulation with the Intralox Series 1000 Mold to Width Insert Roller belt.

Used across many industries—especially beverage—S1000 Mold to Width Insert Roller belting offers low back pressure accumulation to prevent product damage from packaging to palletizing. It features a 0.60-in (15.2-mm) pitch that provides exceptional tight transfer capability and eliminates the need for dead plates.

Superior belt strength allows accumulation and acceleration on a single conveyor
Yellow acetal rollers improve product control and stability
Small pitch minimizes chordal rise and decline
0.75-in (19.1-mm) nose-roller transfers
6.0-in (152.4-mm) belt width

	in	mm
Pitch	0.60	15.2
Molded Width	6	152.4
Open Area	12.5%
Hinge Style	Closed
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Rollers protrude both above and below the belt.
Rollers are on the hinge rod.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Minimal back tension required for sprocket engagement
Compatible with 0.75 in (19.1 mm) diameter nosebars for tight transfer applications. Contact Intralox Customer Service for more information.
The belt can be supported using 1.38 in (35.1 mm) wide or narrower parallel wearstrips.
For low back-pressure applications, place the wearstrips between the rollers. For activated roller applications, place the wearstrip directly under rollers.
Yellow acetal rollers are 0.3 in (7.6 mm) wide and 0.48 in (12.1 mm) diameter.
Roller indent from edge of belt to edge of roller: 0.44 in (11.2 mm).