Mold to Width Flat Top with Tabs
Series 1000Achieve seamless product transfers with the Intralox Series 1000 Mold to Width Flat Top with Tabs belt.
The S1000 Mold to Width Flat Top with Tabs belt excels in applications that require smooth transfers and superior belt strength. Used across many industries—especially beverage—it features a small pitch that provides exceptional tight transfer capability and eliminates the need for dead plates.
- Bi-directional with no preferred run direction
- 0.60-in (15.2-mm) pitch reduces chordal action
- 0.75-in (19.1-mm) nose-roller transfers
- Includes molded tracking tabs
- Available in the following belt widths:
- 3.25 in (83 mm)
- 3.35 in (85 mm)
- 4.50 in (114 mm)
| in | mm | |
| Pitch | 0.60 | 15.2 |
| Molded Widths | 3.25 | 83 |
| 3.35 | 85 | |
| 4.50 | 114 | |
| Opening Size | — | — |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth, closed upper surface with fully flush edges
- Molded with robust tracking tabs to support the belt in heavy side-loading applications
- Lug tooth sprockets improve sprocket engagement and simplify installation.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Minimal back tension required for sprocket engagement
- 3.25 in (83 mm) tabbed belts use one sprocket.
- 4.50 in (114 mm) and 3.35 in (85 mm) tabbed belts use up to three sprockets.
- Can be used over 0.75 in (19.1 mm) diameter nosebars for tight transfers if every other belt row has tabs
- Width tolerances: +0.000/-0.020 in (+0.00/-0.50 mm)
- 3.35 in (85 mm) molded tracking tabs fit into standard 1.65625 in (42.1 mm) wearstrip tracks, ensuring proper belt alignment.
- 3.25 in (83 mm) and 4.50 in (114 mm) molded tracking tabs fit into standard 1.75 in (44.5 mm) wearstrip tracks, ensuring proper belt alignment.
- Available in 10 ft (3 m) increments
| Belt Width | Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| in | mm | lbf | N | °F | °C | lb/ft | kg/m | ||
| 3.25 | 83 | Acetal | Nylon | 406 | 1,810 | -50 to 200 | -46 to 93 | 0.44 | 0.65 |
| 3.35 | 85 | Acetal | Nylon | 419 | 1,860 | -50 to 200 | -46 to 93 | 0.44 | 0.65 |
| 4.50 | 114 | Acetal | Nylon | 563 | 2,500 | -50 to 200 | -46 to 93 | 0.60 | 0.89 |
