Mold to Width Flat Top
Series 1000Achieve seamless product transfers with Intralox Series 1000 Mold to Width Flat Top belting.
The S1000 Mold to Width Flat Top belt excels in applications that require smooth transfers and superior belt strength. Used across many industries—especially beverage—it features a small pitch that provides exceptional tight transfer capability and eliminates the need for dead plates.
- Bi-directional with no preferred run direction
- 0.60-in (15.2-mm) pitch reduces chordal action
- 0.75-in (19.1-mm) nose-roller transfers
- Available in the following widths:
- 1.1 in (29 mm)
- 1.5 in (37 mm)
- 1.8 in (46 mm)
- 2.2 in (55 mm)
| in | mm | |
| Pitch | 0.60 | 15.2 |
| Molded Widths | 1.1 | 29 |
| 1.5 | 37 | |
| 1.8 | 46 | |
| 2.2 | 55 | |
| Opening Size | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth, closed upper surface with fully flush edges.
- Underside design and small pitch allow the belt to run smoothly around nosebars.
- Lug tooth sprockets improve sprocket engagement and simplify installation.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Minimal back tension required for sprocket engagement
- Available in 10 ft (3 m) increments.
- Can be used over 0.75 in (19.1 mm) diameter nosebars for tight transfers.
- 29 mm and 37-mm belts use one sprocket.
- 46 mm and 55-mm belts can use up to two sprockets.
| Belt Width | Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| in | mm | lbf | N | °F | °C | lb/ft | kg/m | ||
| 1.1 | 29 | Acetal | Nylon | 140 | 623 | -50 to 200 | -46 to 93 | 0.15 | 0.22 |
| 1.5 | 37 | Acetal | Nylon | 200 | 890 | -50 to 200 | -46 to 93 | 0.19 | 0.28 |
| 1.8 | 46 | Acetal | Nylon | 230 | 1,020 | -50 to 200 | -46 to 93 | 0.23 | 0.35 |
| 2.2 | 55 | Acetal | Nylon | 2011 | 8941 | -50 to 200 | -46 to 93 | 0.28 | 0.42 |
270 lbf (1,200 N) for 2.2 in (55 mm) with two (2) sprockets
