Flat Top ONEPIECE™ Live Transfer 6.3 in

Series 1000

Achieve self-clearing, 90-degree transfers in material-handling applications with the Intralox Series 1000 Flat Top ONEPIECE Live Transfer 6.3 in belt.

This belt features a transfer edge that provides smooth 90-degree transfers, eliminating the need for dead plates. Its tracking tabs guarantee consistent transfer gap control, while its lug-tooth sprockets improve sprocket engagement and simplify installation.

Small pitch reduces chordal action
0.75-in (19.1-mm) nose-roller transfers
6.3-in (160-mm) width meets industry standards

	in	mm
Pitch	0.60	15.2
Molded Width	6.3	160
Width Increments	-	-
Open Area	0%
Hinge Style	Closed
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Smooth, closed upper surface with fully flush edges.
Transfer edge is an integral part of this belt.
Designed for smooth, self-clearing, right-angle transfers onto takeaway belts.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Uses three sprockets.
Lug tooth sprockets improve sprocket engagement and simplify installation.
For information regarding sprocket placement, see the center sprocket offset table in Retainer Rings and Center Sprocket Offset.
Minimal back tension required for sprocket engagement
Addition of a fixed frame support can be necessary. The support ensures that the transfer belt does not snag when it intersects with the takeaway belt. Add support below the transfer belt, before the transfer. See 90-Degree Container Transfers for more information.
Requires sprockets with a pitch diameter of 1.50 in (38.1 mm) or larger.
Cannot be used over 0.75 in (19.1 mm) diameter nosebars for tight transfers.
Molded tracking tabs fit into standard 1.75 in (44.5 mm) wearstrip tracks to ensure proper belt alignment.
Available in 10 ft (3 m) increments.