Raised Rib with Heavy-Duty Edge

Series 900

Achieve seamless container transfers with the Intralox Series 900 Raised Rib with Heavy-Duty Edge (HDE) belt.

This belt features raised surface ribs designed to engage with finger transfer plates, which ensure continuous product flow. By eliminating transfer and tippage issues, it reduces downtime and increases throughput.

Fully flush edges promote worker safety
Raised ribs extend 3/16 in (4.7 mm) above basic modules
HDE minimizes foreign material risks and protects against edge breakage

	in	mm
Pitch	1.07	27.2
Minimum Width	4.7	118.4
Width Increments	0.33	8.4
Opening Size (approx.)	0.24 x 0.28	6.1 x 7.1
Open Area	38%
Hinge Style	Open
Rod Retention; Rod Type	Occluded edge; unheaded

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
The combination of a heavy-duty edge and unheaded rods inhibits rod migration caused by thermal expansion in microwave applications.
Compatible with Intralox Rod Remover
Can be used with finger transfer plates to eliminate product tipping and hang-ups
Raised ribs extend 3/16 in (4.7 mm) above the module, with fully flush edges.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Flights and sideguards are available. Minimum indent: 2 in (50.8 mm)

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Belt Strength		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Polypropylene	700	10,200	34 to 220	1 to 104	1.07	5.22
Enduralox polypropylene	Polypropylene	700	10,200	34 to 220	1 to 104	1.07	5.22