Raised Rib

Series 900

Achieve seamless container transfers with the Intralox Series 900 Raised Rib belt.

This belt features raised surface ribs designed to engage with finger transfer plates, which ensure continuous product flow. By eliminating transfer and tippage issues, it reduces downtime and increases throughput.

Fully flush edges promote worker safety
Raised ribs extend 3/16 in (4.7 mm) above basic modules
Available in High Heat Resistant (HHR) nylon material for high-temperature environments

	in	mm
Pitch	1.07	27.2
Minimum Width	2	51
Width Increments	0.33	8.4
Opening Size (approximate)	0.24 × 0.28	6.1 × 7.1
Open Area	38%
Product Contact Area	35%
Hinge Style	Open
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
HR nylon belts use short rodlets to hold the main hinge rod in place. The rodlets are made from the same material as the main rod.
Use HR nylon in dry, elevated-temperature applications.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Raised ribs extend 3/16 in (4.7 mm) above basic module, with fully flush edges.

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Belt Strength		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Polypropylene	700	10,200	34 to 220	1 to 104	1.07	5.21
Enduralox polypropylene	Polypropylene	700	10,200	34 to 220	1 to 104	1.07	5.21
Polyethylene	Polyethylene	350	5,110	-50 to 150	-46 to 66	1.14	5.57
Acetal	Polypropylene	1,480	21,600	34 to 200	1 to 93	1.68	8.19
HSEC acetal	Polypropylene	800	11,700	34 to 200	1 to 93	1.68	8.19
HHR nylon	HHR Nylon	1,200	17,500	-50 to 310	-46 to 154	1.60	7.80
Acetal¹	Polyethylene	1,000	14,600	-50 to 70	-46 to 21	1.68	8.19

Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating.

Document Name	Document Type	File Type	File Size
S900_RaisedRib_[SideView]_(Imperial).dxf	CAD Drawing	DXF	61 KB
S900_RaisedRib_[SideView]_(Metric).dxf	CAD Drawing	DXF	64 KB
S900_RaisedRib_[TopView]_(Imperial).dxf	CAD Drawing	DXF	336 KB
S900_RaisedRib_[TopView]_(Metric).dxf	CAD Drawing	DXF	353 KB