Belt Finder

Perforated Flat Top

Series 900
Request a Quote

Secure containers on inclines with the Intralox Series 900 Perforated Flat Top belt.

Designed to integrate with vacuum systems, the S900 Perforated Flat Top belt features custom-sized holes that enable superior suction for incline conveyance. Multiple hole size options are available to accommodate various product dimensions and system needs.

  • 1.07-in (27.2-mm) pitch
  • Holes have radiused top edges for quiet operation
  • Available with the following hole diameters:
    • 0.125 in (3.2 mm)
    • 0.15625 in (4.0 mm)
    • 0.1875 in (4.8 mm)
inmm
Pitch1.0727.2
Minimum Width251
Width Increments0.338.4
Opening SizeSee Product Notes.
Open AreaSee Product Notes.
Hinge StyleClosed
Rod Retention; Rod TypeSnap-lock; headed

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Hole sizes include 3% open area at the hinge.
  • Holes have a radiused top edge, allowing quiet operation and good vacuum performance.
  • Other hole dimensions and patterns can be created by drilling S900 Flat Top.
  • HR nylon belts use short rodlets to hold the main hinge rod in place and are made from the same material as the main rod.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • Use stainless steel split sprockets in elevated-temperatures.
  • Designed for vacuum transfer applications, with a scalloped underside to reduce carryway blockage.
  • Available hole sizes:
    • Ø 0.125 in (3.2 mm) - 5% open area
    • Ø 0.15625 in (4.0 mm) - 6% open area
    • Ø 0.1875 in (4.8 mm) - 8% open area

Belt MaterialDefault Rod Material, Diameter 0.18 in (4.6 mm)Belt StrengthTemperature Range (continuous)Belt Mass 1/8 inBelt Mass 5/32 inBelt Mass 3/16 in
lbf/ftN/m°F°Clb/ft²kg/m²lb/ft²kg/m²lb/ft²kg/m²
PolypropylenePolypropylene70010,20034 to 2201 to 104––0.934.54––
PolyethylenePolyethylene3505,110-50 to 150-46 to 66––0.984.79––
AcetalPolypropylene1,48021,60034 to 2001 to 931.487.231.467.111.436.98
HSEC acetalPolypropylene80011,70034 to 2001 to 93––1.467.11––
FR TPESPolypropylene75010,90040 to 1504 to 66––1.597.76––
HR nylonHR Nylon1,20017,500-50 to 240-46 to 116––1.406.80––
Acetal1Polyethylene1,00014,600-50 to 70-46 to 211.487.231.467.111.436.98
UVFRUVFR70010,200-34 to 2001 to 932.049.962.049.962.049.96

  1. Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating. 1/8 in (3.2 mm) and 3/16 in (4.8 mm) hole sizes are available in acetal only.

Series 900