Belt Finder

Open Grid

Series 900
Request a Quote

Secure products on low-level inclines and declines with the Intralox Series 900 Open Grid belt.

Used especially in shrimp processing, the S900 Open Grid belt features raised transverse ridges that stabilize products on inclines and declines. Its large open area facilitates drainage and simplifies cleaning.

  • 1.07-in (27.2-mm) pitch
  • 38% open area
  • 0.188-in (4.8-mm) transverse ridge height
inmm
Pitch1.0727.2
Minimum Width251
Width Increments0.338.4
Opening Size (approximate)0.24 × 0.286.1 × 7.1
Open Area38%
Hinge StyleOpen
Rod Retention; Rod TypeSnap-lock; headed

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Large, open area provides excellent drainage.
  • Low-profile transverse ridges help move product up inclines and down declines.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • Not recommended for product accumulation conditions. Contact Intralox Customer Service for more information.
  • Transverse ridge height: 0.188 in (4.8 mm).
  • Normal ridge indent: 0.25 in (6.4 mm).

Belt MaterialDefault Rod Material, Diameter 0.18 in (4.6 mm)Belt StrengthTemperature Range (continuous)Belt Mass
lbf/ftN/m°F°Clb/ft²kg/m²
PolypropylenePolypropylene70010,20034 to 2201 to 1040.813.95
PolyethylenePolyethylene3505,110-50 to 150-46 to 660.844.09
AcetalPolypropylene1,48021,60034 to 2001 to 931.266.14
Acetal1Polyethylene1,00014,600-50 to 70-46 to 211.266.14

  1. Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating.

Series 900