Ensure exceptional performance in kitchen-area and extrusion applications with the Intralox Series 900 Open Flush Grid belt.
This belt features a 43% open area that supports product cooling in kitchen-area applications and accommodates high-volume water flow in extruder cooling lines. Its unheaded rod retention system pairs durability with ease of maintenance, extending belt life and simplifying rod removal and replacement.
- Bi-directional with no preferred run direction
- Flush Edge design allows for rod expansion if exposed to moisture
- Maximum opening of 0.28 in x 0.29 in (7.1 mm x 7.4 mm) reduces product loss risks
- Available in High Heat Resistant (HHR) nylon for high-heat applications such as fryer infeed and outfeed
| in | mm | |
| Pitch | 1.07 | 27.2 |
| Minimum Width | 10 | 254 |
| Width Increments (See Product Notes.) | 1.0 | 25.4 |
| Minimum Opening Size (approximate) | 0.17 x 0.29 | 4.3 x 7.4 |
| Maximum Opening Size (approximate) | 0.28 x 0.29 | 7.1 x 7.4 |
| Open Area | 43% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Open pattern with a smooth upper surface and fully flush edges.
- Flush edge accommodates special abrasion resistant nylon rod growth for belt widths that are 42 in (1066 mm) or narrower.
- Other width increments may be available. Contact Intralox Customer Service for more information.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- To accommodate the rod retention design, ensure that outer sprockets are indented 2.5 in (63.5 mm) from the edge of the belt to the centerline of the sprocket.
- Flights are available.
| Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 700 | 10,200 | 34 to 220 | 1 to 104 | 0.76 | 3.71 |
| Acetal | Polypropylene | 1,480 | 21,600 | 34 to 200 | 1 to 93 | 1.10 | 5.37 |
| HR nylon | HR nylon | 1,200 | 17,500 | -50 to 240 | -46 to 116 | 1.02 | 4.98 |
| HHR nylon | HHR nylon | 1,200 | 17,500 | -50 to 310 | -46 to 154 | 1.04 | 5.08 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| Series 900 Open Flush Grid Cooling Lines Application Highlight | 579 KB | ||
| Series 900 Open Flush Grid Kitchen Area Application Highlight | 883 KB | ||
| Series 900 Open Flush Grid Product Highlight | 883 KB | ||
| Solutions for Tortilla Processing Application Highlight | 2 MB |
EZ Clean™ Polyurethane Sprocket
Series 900
Split Metal Sprocket
Series 900
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprocket
Series 900
EZ Clean™ Acetal Sprocket
Series 900
Molded Tooth Plate Split Glass-Filled Nylon Sprockets
Series 900
Dual-Tooth Nylon Split Sprockets
Series 900
Molded Acetal Sprocket
Series 900
Molded Polyurethane Sprocket
Series 900
Molded Nylon Sprocket
Series 900
Nylon Split Sprockets
Series 900
Molded Polypropylene Sprocket
Series 900
Finger Transfer Plates
Series 900
Flat Top Base Flights (Streamline Rubber)
Series 900
Flush Grid Base Flights (Streamline/No-Cling)
Series 900
Hold Down Tabs
Series 900
Flush Grid Nub Top Base Flights (Double No-Cling)
Series 900
Sideguards
Series 900
Open Flush Grid, Flush Edge Base Flights (No-Cling)
Series 900
Flat Top Base Flights (Streamline)
Series 900
