ONEPIECE™ Live Transfer Flush Grid

Series 900

Achieve self-clearing, 90-degree transfers with the Intralox Series 900 ONEPIECE Live Transfer Flush Grid belt.

Used especially in canmaking, this belt features a transfer edge that provides smooth 90-degree transfers, eliminating the need for dead plates. Its tracking tabs guarantee consistent transfer gap control, while its large open area simplifies cleaning.

1.07-in (27.2-mm) pitch
38% open area
Built with nylon rods for superior wear resistance

	in	mm
Pitch	1.07	27.2
Minimum Width	4.7	119
Width Increments	0.33	8.4
Opening Size (approximate)	0.24 × 0.28	6.1 × 7.1
Open Area	38%
Hinge Style	Open
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Transfer edge is an integral part of this belt.
Nylon rods provide superior wear resistance.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Addition of a fixed frame support can be necessary. The support ensures that the transfer belt does not snag when it intersects with the takeaway belt. Add support below the transfer belt, before the transfer. See 90-Degree Container Transfers for more information.
When moving products from transfer belt to takeaway belt, ensure the transfer belt surface is no more than 0.06 in (1.5 mm) above the takeaway belt surface. When product is moving from the infeed belt onto the transfer belt, ensure the belts surfaces are level.
For custom belt widths, contact Intralox Customer Service.
Do not use with sprockets smaller than a 3.5 in (89 mm) pitch diameter (10 tooth) sprocket. If a 3.5 in (89 mm) pitch diameter is required, do not use a split sprocket.
For belt-strength calculations, subtract 1.5 in (38 mm) from the actual belt width.
Also available in a 4.7 in (119 mm) wide single-tracking tab belt and 6 in (152 mm) wide double-tracking tab belt.
Molded tracking tabs fit into standard 1.75 in (44.5 mm) wearstrip tracks, ensuring proper belt alignment.
Available in 10 ft (3 m) increments

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Belt Strength		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Nylon	700	10,200	34 to 220	1 to 104	0.93	4.54
Acetal	Nylon	1,480	21,600	-50 to 200	-46 to 93	1.15	5.62
FR TPES	Nylon	1,000	14,600	40 to 150	4 to 66	1.63	7.95

Document Name	Document Type	File Type	File Size
S900_LiveTransferFlushGrid_Tab_Single_4.7inch_(Imperial).dxf	CAD Drawing	DXF	504 KB
S900_LiveTransferFlushGrid_Tab_Single_4.7inch_(Metric).dxf	CAD Drawing	DXF	550 KB