Belt Finder

ONEPIECE™ Live Transfer Flat Top

Series 900
Request a Quote

Achieve self-clearing, 90-degree transfers with the Intralox Series 900 ONEPIECE Live Transfer Flat Top belt.

This belt features a transfer edge that provides smooth 90-degree transfers, eliminating the need for dead plates. Its tracking tabs guarantee consistent transfer gap control, while its modular plastic construction simplifies maintenance and improves cleanability.

  • 1.07-in (27.2-mm) pitch
  • Closed surface prevents product loss
  • Built with nylon rods for superior wear resistance
inmm
Pitch1.0727.2
Minimum Width4.7119
Width Increments0.338.4
Opening Size (approximate)--
Open Area0%
Hinge StyleClosed
Rod Retention; Rod TypeSnap-lock; headed

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Transfer edge is an integral part of the belt.
  • Nylon rods provide superior wear resistance.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • Addition of a fixed frame support can be necessary. The support ensures that the transfer belt does not snag when it intersects with the takeaway belt. Add support below the transfer belt, before the transfer. See 90-Degree Container Transfers for more information.
  • When moving products from transfer belt to takeaway belt, ensure the transfer belt surface is no more than 0.06 in (1.5 mm) above the takeaway belt surface. When product is moving from the infeed belt onto the transfer belt, ensure the belts surfaces are level.
  • For custom belt widths, contact Intralox Customer Service.
  • Available in 10 ft (3 m) increments.
  • Also available in a 4.7 in (119 mm) wide single tracking tab belt and 6 in (152 mm) wide double tracking tab belt.
  • Molded tracking tabs fit into standard 1.75 in (44.5 mm) wearstrip tracks ensuring proper belt alignment.
  • Do not use with sprockets smaller than a 3.5 in (89 mm) pitch diameter (10 tooth) sprocket. If a 3.5 in (89 mm) pitch diameter is required, do not use a split sprocket.

Belt MaterialDefault Rod Material, Diameter 0.18 in (4.6 mm)Belt StrengthTemperature Range (continuous)Belt Mass
lbf/ftN/m°F°Clb/ft²kg/m²
PolypropyleneNylon70010,20034 to 2201 to 1040.934.54
AcetalNylon1,48021,600-50 to 200-46 to 931.507.30

Series 900