Nub Top™

Series 900

Achieve reliable product release and prevent carry-over with the Intralox Series 900 Nub Top belt.

S900 Nub Top belting includes raised nubs that reduce surface adhesion, providing seamless product release. Fully flush edges and a smooth upper surface boost worker safety, while its modular plastic construction simplifies maintenance and improves cleanability.

1.07-in (27.2-mm) pitch
Raised 0.31-in (7.95-mm) nubs
Minimum alternating edge indents of 2 in and 3 in (51 mm and 76 mm)

	in	mm
Pitch	1.07	27.2
Minimum Width	10	254
Width Increments	0.33	8.4
Open Area	0%
Product Contact Area	7%
Hinge Style	Closed
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Fully flush edges.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Ideal for batch-off applications.
Minimum nominal alternating edge indents: 2 in (51 mm) and 3 in (76 mm).

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Belt Strength¹		Temperature Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Polypropylene	700	10,200	34 to 220	1 to 104	0.98	4.78

When using steel sprockets, the belt strength for polyethylene is 240 lbf/ft (3,500 N/m). Contact Intralox Customer Service for availability of polyurethane sprockets.