Mold to Width Flat Top with Holes
Series 900Ensure optimal camera inspection performance with the Intralox Series 900 Mold to Width Flat Top with Holes belt.
Developed for the canmaking industry, the S900 Mold to Width Flat Top with Holes belt features tracking tabs and centered perforations that deliver exceptional results in high-speed vacuum applications. Its High Heat Resistant (HHR) nylon material enables consistent can spacing and superior wear resistance, while advanced sprocket engagement supports belt and sprocket longevity.
- Dark grey matte finish reduces glare while providing critical contrast for camera inspection
- Four-hole design improves suction and safeguards proper can spacing
- HHR nylon material withstands continuous temperatures up to 310°F (154°C)
| in | mm | |
| Pitch | 1.07 | 27.2 |
| Molded Widths | 3.35 | 85 |
| 4.5 | 114 | |
| Open Area | See Product Notes. | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Has fully flush edges.
- Molded with robust tracking tabs to support the belt in heavy side-loading applications
- Holes have a chamfered top edge allowing quiet operation and good vacuum performance.
- Rod material is abrasion resistant.
- HHR nylon belt material has a UL94 flammability rating of V2, appropriate for elevated temperature applications, such as pin strippers and light testers.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Use a nylon, machined, split sprocket in high-speed vacuum applications.
- Split sprocket is available for easy installation.
- Available in 10 ft (3 m) increments.
- Belt has 3% open area at the hinges and 3% to 4% open area at the holes.
- Hole diameter: 0.217 in (5.51 mm) on the 3.35-in (85-mm) belt; 0.219 in (5.56 mm) on the 4.5-in (114-mm) belt.
| Belt Width | Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| in | mm | lbf | N | °F | °C | lb/ft | kg/m | ||
| 3.35 | 85 | HHR nylon | Nylon | 220 | 979 | -50 to 310 | -46 to 154 | 0.41 | 0.61 |
| 4.5 | 114 | HHR nylon | Nylon | 450 | 2,000 | -50 to 310 | -46 to 154 | 0.53 | 0.79 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| Series 900 Mold to Width Flat Top with Holes Product Highlight | 574 KB |
Split Metal Sprocket
Series 900
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprocket
Series 900
EZ Clean™ Sprocket
Series 900
Molded Tooth Plate Split Glass-Filled Nylon Sprockets
Series 900
Dual-Tooth Nylon Split Sprockets
Series 900
Molded Sprocket
Series 900
Nylon Split Sprockets
Series 900
Finger Transfer Plates
Series 900
Flat Top Base Flights (Streamline Rubber)
Series 900
Flush Grid Base Flights (Streamline/No-Cling)
Series 900
Hold Down Tabs
Series 900
Flush Grid Nub Top Base Flights (Double No-Cling)
Series 900
Sideguards
Series 900
Open Flush Grid, Flush Edge Base Flights (No-Cling)
Series 900
Flat Top Base Flights (Streamline)
Series 900
