| in | mm | |
| Pitch | 1.07 | 27.2 |
| Molded Widths | 3.25 | 83 |
| 4.5 | 114 | |
| 7.5 | 191 | |
| - | 85 | |
| Opening Size (approximate) | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Snap-lock; headed | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth, closed surface with fully flush edges.
- Molded with robust tracking tabs to support the belt in heavy side-loading applications
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Do not use with sprockets smaller than a 3.5 in (89 mm) pitch diameter (10 tooth) sprocket. If a 3.5 in (89 mm) pitch diameter is required, do not use a split sprocket.
- One sprocket can be placed on the 3.25 in (83 mm) and 85-mm belt. Up to three sprockets can be placed on the 4.5 in (114 mm) belt. Up to five sprockets can be placed on the 7.5 in (191 mm) belt.
- Available in 10 ft (3 m) increments
| Belt Width | Belt Material | Default Rod Material, Diameter 0.18 in (4.6 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| in | mm | lbf | N | °F | °C | lb/ft | kg/m | ||
| 3.25 | 83 | Polypropylene | Nylon | 130 | 578 | 34 to 220 | 1 to 104 | 0.37 | 0.55 |
| 3.25 | 83 | Acetal | Nylon | 250 | 1,110 | -50 to 200 | -46 to 93 | 0.52 | 0.77 |
| 4.5 | 114 | Polypropylene | Nylon | 263 | 1,170 | 34 to 220 | 1 to 104 | 0.52 | 0.77 |
| 4.5 | 114 | Acetal | Nylon | 555 | 2,470 | -50 to 200 | -46 to 93 | 0.74 | 1.10 |
| 7.5 | 191 | Polypropylene | Nylon | 438 | 1,950 | 34 to 220 | 1 to 104 | 0.83 | 1.24 |
| 7.5 | 191 | Acetal | Nylon | 800 | 3,560 | -50 to 200 | -46 to 93 | 1.18 | 1.76 |
| 85 | Acetal | Nylon | 500 | 2,220 | -50 to 200 | -46 to 93 | 0.50 | 0.74 | |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S900_FlatTop_MoldToWidth_Tab_Double_3.25inch_(Imperial).dxf | CAD Drawing | DXF | 152 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_3.25inch_(Metric).dxf | CAD Drawing | DXF | 170 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_4.5inch_(Imperial).dxf | CAD Drawing | DXF | 390 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_4.5inch_(Metric).dxf | CAD Drawing | DXF | 429 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_7.5inch_(Imperial).dxf | CAD Drawing | DXF | 311 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_7.5inch_(Metric).dxf | CAD Drawing | DXF | 352 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_85mm_(Imperial).dxf | CAD Drawing | DXF | 107 KB |
| S900_FlatTop_MoldToWidth_Tab_Double_85mm_(Metric).dxf | CAD Drawing | DXF | 101 KB |
Split Metal Sprocket
Series 900
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprocket
Series 900
EZ Clean™ Sprocket
Series 900
Molded Tooth Plate Split Glass-Filled Nylon Sprockets
Series 900
Dual-Tooth Nylon Split Sprockets
Series 900
Molded Sprocket
Series 900
Nylon Split Sprockets
Series 900
Finger Transfer Plates
Series 900
Flat Top Base Flights (Streamline Rubber)
Series 900
Flush Grid Base Flights (Streamline/No-Cling)
Series 900
Hold Down Tabs
Series 900
Flush Grid Nub Top Base Flights (Double No-Cling)
Series 900
Sideguards
Series 900
Open Flush Grid, Flush Edge Base Flights (No-Cling)
Series 900
Flat Top Base Flights (Streamline)
Series 900
