Flush Grid with Insert Rollers

Series 900

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Uses acetal rollers.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
For applications where low back-pressure accumulation is required.
Product accumulation load is 5% to 10% of product weight.
For low back pressure applications, place wearstrips between rollers. For driven applications, place wearstrip directly under rollers.
Do not place sprockets inline with rollers.
Standard roller diameter: 0.75 in (19.05 mm). Other roller diameters are available. Contact Intralox Customer Service for more information.
Standard roller spacing across belt width: 2 in (51 mm), 3 in (76 mm), or 4 in (102 mm) inline or staggered.
Standard roller spacing along belt length: 1.07 in (27.2 mm), 2.14 in (54.4 mm).
For custom roller-placement options, contact Intralox Customer Service.
Minimum roller indent: 1.0 in (25.4 mm).

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Belt Strength						Temperature Range (continuous)		Belt Mass
		Roller Width Spacing
		2 in	51 mm	3 in	76 mm	4 in	102 mm
		lbf/ft	N/m	lbf/ft	N/m	lbf/ft	N/m	°F	°C	lb/ft²	kg/m²
Polypropylene	Polypropylene	490	7,150	550	8,030	590	8,610	34 to 220	1 to 104	0.76	3.71
Acetal	Polypropylene	1,030	15,000	1,170	17,100	1,240	18,100	34 to 200	1 to 93	1.15	5.61