Flush Grid Nub Top™

Series 900

Achieve reliable product release and prevent carry-over with the Intralox Series 900 Flush Grid Nub Top belt.

Used across many industries, this belt features a large open area that encourages fluid drainage and promotes airflow to accelerate cooling. Its raised 0.05-in (1.3-mm) nubs enable seamless release of products like leafy greens, while its modular plastic construction simplifies maintenance and improves cleanability.

1.07-in (27.2-mm) pitch
38% open area
Minimum alternating edge indents of 1 in and 2 in (25 mm and 51 mm)

	in	mm
Pitch	1.07	27.2
Minimum Width	6	152
Width Increments	0.33	8.4
Opening Size (approximate)	0.24 × 0.28	6.1 × 7.1
Open Area	38%
Product Contact Area	3%
Hinge Style	Open
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Fully flush edges.
Built with Flush Grid edge modules.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Not recommended for product accumulation conditions. For information about friction values between product and belt, contact Intralox Customer Service.
Can only be used with S900 Flush Grid base flights.
Minimum nominal alternating edge indents: 1 in (25 mm) and 2 in (51 mm) pattern.