Elevate worker safety in industrial applications with our PeopleVeyor solution.
The Intralox Series 400 Non Skid belt features a diamond tread surface pattern that reduces operator slippage risks. By improving ergonomics and workflows, this belt offers measurable benefits for both employees and production.
- Slidelox rod retention system eases maintenance
- Available in high strength electrically conductive (HSEC) acetal
- Refer to Intralox S4500 Non Skid or Non Skid Raised Rib belting for advanced strength
| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 3.5 | 89 |
| Width Increments | 0.33 | 8.4 |
| Opening Size | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Among highest strength rating of all Intralox belts.
- Slidelox are glass-reinforced polypropylene.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- For stronger belt performance, see S4500 Non Skid and S4500 Non Skid Raised Rib.
- Contact Intralox Customer Service for flight availability.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| HSEC acetal | Nylon | 2,720 | 39,700 | -50 to 200 | -46 to 93 | 2.88 | 14.09 |
| Polypropylene | Nylon | 2,400 | 35,000 | -34 to 220 | 1 to 104 | 1.81 | 8.84 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S400_NonSkid_FlushEdge_Slidelox_4inch_(Imperial).dxf | CAD Drawing | DXF | 110 KB |
| S400_NonSkid_FlushEdge_Slidelox_4inch_(Metric).dxf | CAD Drawing | DXF | 120 KB |
| S400_NonSkid_FlushEdge_Slidelox_6inch_(Imperial).dxf | CAD Drawing | DXF | 155 KB |
| S400_NonSkid_FlushEdge_Slidelox_6inch_(Metric).dxf | CAD Drawing | DXF | 169 KB |
| S400_NonSkid_Interior_4inch_(Imperial).dxf | CAD Drawing | DXF | 110 KB |
| S400_NonSkid_Interior_4inch_(Metric).dxf | CAD Drawing | DXF | 110 KB |
| S400_NonSkid_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 148 KB |
| S400_NonSkid_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 148 KB |
Split Metal Sprocket
Series 400
Molded Polyurethane Sprocket
Series 400
Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400
Split Low Back Tension Ultra Abrasion Resistant Polyurethane Sprocket
Series 400
Molded Polypropylene Sprocket
Series 400
Molded Tooth Plate Split Polyurethane Composite Sprockets
Series 400
Split Ultra Abrasion Resistant Polyurethane Sprockets
Series 400
HR Nylon Sprockets
Series 400
HR Nylon Split Sprockets
Series 400
Molded Acetal Sprocket
Series 400
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprockets
Series 400
Split Support Wheel
Series 400
Hold Down Tabs
Series 400
Dimensional Requirements for S400 Self-Clearing Finger Transfer Plate Installation
Series 400
Two-Material Finger Transfer Plates
Series 400
Sideguards
Series 400
Finger Transfer Plates
Series 400
Self-Clearing Finger Transfer Plates
Series 400
Open Hinge Base Flights (Streamline/No-Cling)
Series 400
Flush Grid Base Flights (Double No-Cling)
Series 400
Insert Nuts
Series 400
Flat Top Base Flights (Streamline)
Series 400
Flush Grid Base Flights (Streamline/No-Cling)
Series 400
