Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400| Available for all belts except Open Hinge and Roller belts. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Teeth (Chordal Action) | Nom. Pitch Diameter | Nom. Outer Diameter | Nom. Hub Width | Available Bore Sizes | ||||||
| in | mm | in | mm | in | mm | Round in | Square in | Round mm | Square mm | |
| 10 (4.89%) | 6.4 | 163 | 6.3 | 160 | 1.70 | 43 | 1.5, 2.5 | 40, 60 | ||
| 12 (3.41%) | 7.8 | 198 | 7.7 | 196 | 1.5 | 38 | 1.5, 2.5 | 40, 60 | ||
| 16 (1.92%) | 10.1 | 257 | 10.2 | 259 | 1.5 | 38 | 3.5 | 1.5, 2.5, 3.5 | 90 | |
Recommended for use on drive shafts only. There is very little belt tension when a belt engages the idle sprockets. In some applications, the belt does not have enough tension to engage the added low back tension teeth, causing the belt to disengage on the idle sprockets.
