Simplify reliable conveyance with the Intralox Series 400 Flush Grid belt.
The S400 Flush Grid belt combines dependable performance and a moderate open area. Available with flights and sideguards, it offers all the advantages of modular plastic belting—including easy maintenance and streamlined cleaning.
- 17% open area supports efficient drainage
- Available in acetal, polyethylene, or polypropylene materials
- For advanced strength and increased open area, refer to Intralox S4500 Flush Grid belting
| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 2 | 51 |
| Width Increments | 0.33 | 8.4 |
| Opening Size (approximate) | 0.25 × 0.18 | 6.4 × 4.6 |
| Open Area | 17% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | See Product Notes. | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth upper surface and straightforward design provide free product movement.
- Uses headed rods for belts without Slidelox rod retention. Uses unheaded rods for belts with Slidelox rod retention.
- Slidelox rod retention is recommended for belts 6.0 ft (1829 mm) wide and wider.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Flights and sideguards are available.
- Compatible with Intralox belt tensioners. See Intralox Belt Tensioners for more information.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 2,400 | 35,000 | 34 to 220 | 1 to 104 | 1.82 | 8.89 |
| Enduralox polypropylene | Enduralox polypropylene | 2,400 | 35,000 | 34 to 220 | 1 to 104 | 1.82 | 8.89 |
| Polyethylene | Polyethylene | 1,800 | 26,300 | -100 to 150 | -73 to 66 | 1.90 | 9.28 |
| Acetal | Polypropylene | 3,200 | 46,700 | 34 to 200 | 1 to 93 | 2.77 | 13.51 |
| Acetal1 | Polyethylene | 3,000 | 43,800 | -50 to 70 | -46 to 21 | 2.77 | 13.51 |
Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S400_ FlushGrid_FlushEdge_[SideView]_(Imperial).dxf | CAD Drawing | DXF | 84 KB |
| S400_ FlushGrid_FlushEdge_[SideView]_(Metric).dxf | CAD Drawing | DXF | 82 KB |
| S400_FlushGrid_FlushEdge_[TopView]_(Imperial).dxf | CAD Drawing | DXF | 356 KB |
| S400_FlushGrid_FlushEdge_[TopView]_(Metric).dxf | CAD Drawing | DXF | 381 KB |
Split Metal Sprocket
Series 400
Molded Polyurethane Sprocket
Series 400
Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400
Split Low Back Tension Ultra Abrasion Resistant Polyurethane Sprocket
Series 400
Molded Polypropylene Sprocket
Series 400
Molded Tooth Plate Split Polyurethane Composite Sprockets
Series 400
Split Ultra Abrasion Resistant Polyurethane Sprockets
Series 400
HR Nylon Sprockets
Series 400
HR Nylon Split Sprockets
Series 400
Molded Acetal Sprocket
Series 400
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprockets
Series 400
Split Support Wheel
Series 400
Hold Down Tabs
Series 400
Dimensional Requirements for S400 Self-Clearing Finger Transfer Plate Installation
Series 400
Two-Material Finger Transfer Plates
Series 400
Sideguards
Series 400
Finger Transfer Plates
Series 400
Self-Clearing Finger Transfer Plates
Series 400
Open Hinge Base Flights (Streamline/No-Cling)
Series 400
Flush Grid Base Flights (Double No-Cling)
Series 400
Insert Nuts
Series 400
Flat Top Base Flights (Streamline)
Series 400
Flush Grid Base Flights (Streamline/No-Cling)
Series 400
