Simplify reliable conveyance with the Intralox Series 400 Flat Top belt.
The S400 Flat Top belt continues to deliver dependable performance across applications. Available with flights and sideguards, it offers all the advantages of modular plastic belting—including easy maintenance and streamlined cleaning.
- Smooth, closed upper surface allows for free product movement
- Available in acetal, polyethylene, or polypropylene materials
- For advanced strength, refer to Intralox S4500 Flat Top belting
| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 2 | 51 |
| Width Increments | 0.33 | 8.4 |
| Opening Size | - | - |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | See Product Notes. | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Smooth upper surface and straightforward design provide free product movement.
- All S400 Flat Top with abrasion resistant rods are available with Slidelox rod retention.
- Slidelox rod retention is recommended for belts 6.0 ft (1829 mm) wide and wider.
- Use headed rods for belts without Slidelox rod retention. Use unheaded rods with Slidelox rod retention.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Use abrasion resistant split sprockets with acetal S400 Flat Top.
- Flights and sideguards are available.
- For stronger belt performance, see Series 4500 Flat Top.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene | Polypropylene | 2,400 | 35,000 | 34 to 220 | 1 to 104 | 1.81 | 8.82 |
| Polyethylene | Polyethylene | 1,800 | 26,300 | -100 to 150 | -73 to 66 | 1.90 | 9.28 |
| Acetal | Polypropylene | 3,200 | 46,700 | 34 to 200 | 1 to 93 | 2.74 | 13.38 |
| Acetal1 | Polyethylene | 3,000 | 43,800 | -50 to 70 | -46 to 21 | 2.74 | 13.38 |
Polyethylene rods can be used in cold applications when impacts or sudden starts/stops occur. Please note lower rating.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S400_FlatTop_FlushEdge_Slidelox_4inch_(Imperial).dxf | CAD Drawing | DXF | 65 KB |
| S400_FlatTop_FlushEdge_Slidelox_4inch_(Metric).dxf | CAD Drawing | DXF | 71 KB |
| S400_FlatTop_FlushEdge_Slidelox_6inch_(Imperial).dxf | CAD Drawing | DXF | 87 KB |
| S400_FlatTop_FlushEdge_Slidelox_6inch_(Metric).dxf | CAD Drawing | DXF | 96 KB |
Split Metal Sprocket
Series 400
Molded Polyurethane Sprocket
Series 400
Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400
Split Low Back Tension Ultra Abrasion Resistant Polyurethane Sprocket
Series 400
Molded Polypropylene Sprocket
Series 400
Molded Tooth Plate Split Polyurethane Composite Sprockets
Series 400
Split Ultra Abrasion Resistant Polyurethane Sprockets
Series 400
HR Nylon Sprockets
Series 400
HR Nylon Split Sprockets
Series 400
Molded Acetal Sprocket
Series 400
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprockets
Series 400
Split Support Wheel
Series 400
Hold Down Tabs
Series 400
Dimensional Requirements for S400 Self-Clearing Finger Transfer Plate Installation
Series 400
Two-Material Finger Transfer Plates
Series 400
Sideguards
Series 400
Finger Transfer Plates
Series 400
Self-Clearing Finger Transfer Plates
Series 400
Open Hinge Base Flights (Streamline/No-Cling)
Series 400
Flush Grid Base Flights (Double No-Cling)
Series 400
Insert Nuts
Series 400
Flat Top Base Flights (Streamline)
Series 400
Flush Grid Base Flights (Streamline/No-Cling)
Series 400
