90-Degree Angled Roller™
Series 400Support product merging and 90-degree transfers with the Intralox Series 400 90-Degree Angled Roller belt.
This belt features embedded polyurethane rollers that generate lateral product movement for smooth merges and transfers when integrated with complementary equipment like product rails. Its modular design simplifies repairs and maintenance, while its stainless-steel axles provide durability.
- Unheaded, barn door–style rod retention system simplifies rod maintenance and installation
- Accommodates a wide range of package sizes and styles
- Rollers skewed 90 degrees from direction of belt travel
- 2.0-in (50.8-mm) spacing between rollers
| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 6 | 152 |
| Width Increments | 2.00 | 50.8 |
| Opening Size | - | - |
| Open Area | 11% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Barn door; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Black polyurethane rollers with an acetal core are available.
- Black polyurethane rollers are not recommended for product accumulation conditions.
- Axles are stainless steel.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Do not allow black polyurethane rollers to contact flat, continuous carryways or chevron carryways.
- Belt can be supported using parallel wearstrips placed between belt rollers. Contact Intralox Customer Service for more information.
- Not compatible with the 4.0 in (102 mm) pitch diameter split sprocket.
- Not compatible with all 5.2 in (132 mm) pitch diameter sprockets with 2.5 in and 60-mm square bores.
- Roller spacing: 2.0 in (50.8 mm).
- Compatible with Intralox belt tensioners. See Intralox Belt Tensioners for more information.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene/black polyurethane | Nylon | 1,600 | 23,400 | 34 to 200 | 1 to 93 | 2.65 | 12.94 |
Split Metal Sprocket
Series 400
Molded Polyurethane Sprocket
Series 400
Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400
Split Low Back Tension Ultra Abrasion Resistant Polyurethane Sprocket
Series 400
Molded Polypropylene Sprocket
Series 400
Molded Tooth Plate Split Polyurethane Composite Sprockets
Series 400
Split Ultra Abrasion Resistant Polyurethane Sprockets
Series 400
HR Nylon Sprockets
Series 400
HR Nylon Split Sprockets
Series 400
Molded Acetal Sprocket
Series 400
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprockets
Series 400
Split Support Wheel
Series 400
Hold Down Tabs
Series 400
Dimensional Requirements for S400 Self-Clearing Finger Transfer Plate Installation
Series 400
Two-Material Finger Transfer Plates
Series 400
Sideguards
Series 400
Finger Transfer Plates
Series 400
Self-Clearing Finger Transfer Plates
Series 400
Open Hinge Base Flights (Streamline/No-Cling)
Series 400
Flush Grid Base Flights (Double No-Cling)
Series 400
Insert Nuts
Series 400
Flat Top Base Flights (Streamline)
Series 400
Flush Grid Base Flights (Streamline/No-Cling)
Series 400
