30-Degree Angled Roller™
Series 400Improve performance in aligning, box turning, passive discharges, and other industrial applications with the Intralox Series 400 30-Degree Angled Roller belt.
This belt features embedded polyurethane rollers that generate lateral product movement to support various applications, including aligning and passive discharges. Its modular design simplifies repairs and maintenance, while its stainless-steel axles provide durability.
- Unheaded, barn door–style rod retention system simplifies rod maintenance and installation
- Accommodates a wide range of package sizes and styles
- Rollers skewed 30 degrees from direction of belt travel
- 2.0-in (50.8-mm) spacing between rollers
| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 6 | 152 |
| Width Increments | 2.00 | 50.8 |
| Opening Size (approximate) | - | - |
| Open Area | 11% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Barn door; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Uses Activated Roller Belt (ARB) technology.
- Rollers are skewed 30 degrees from the direction of belt travel.
- Grey polyurethane rollers with an acetal core are available.
- Uses stainless steel axles.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Polyethylene belts require ultra-abrasion resistant polyurethane sprocket on the drive shaft. Any sprocket can be used on the idle shaft, except for sprockets with low back-tension teeth.
- When belt rollers are in motion, product moves faster than the speed of the belt. When belt rollers do not rotate, product travels at belt speed.
- Product behavior varies depending on shape and weight of product, conveyor design, and belt speed. Intralox can help you estimate product behavior based on product and conveyor characteristics. Contact Intralox Customer Service for more information.
- Centering configuration is possible using two belts with rollers oriented towards the center of the conveyor.
- Custom belts with any combination of 0-degree, 30-degree, 45-degree, or 60-degree angled rollers are available. Custom belts can also include rollers oriented in different directions. Contact Intralox Customer Service for more information.
- Designed to run on a flat, continuous carryway. A chevron carryway is not recommended.
- Belt can be supported using parallel wearstrips placed in between belt rollers. Contact Intralox Customer Service for more information.
- Alignment belts on a flat, continuous carryway require a side wearstrip. Install the belt to run flush along this wearstrip.
- 2 in (50.8 mm) roller spacing.
- Minimum belt width for polyethylene is 8 in (203 mm).
- Polyethylene belts between 8 in (203 mm) to 10 in (254 mm) wide must be derated to 450 lbf/ft. (6,570 N/m).
- Not compatible with the 4.0 in (102 mm) pitch diameter split sprocket.
- Not compatible with all 5.2 in (132 mm) pitch diameter sprockets with 2.5 in or 60 mm square bores.
- If any moisture is present, the low-temperature limit of the polyethylene belt is 34° F (1° C).
- Compatible with Intralox belt tensioners. See Intralox Belt Tensioners for more information.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene/grey polyurethane | Nylon | 1,600 | 23,400 | 34 to 120 | 1 to 49 | 2.64 | 12.89 |
| Polyethylene/grey polyurethane | Nylon | 500 | 7,300 | 17 to 150 | -8 to 65 | 2.93 | 14.31 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| S400_AngledRollerBelt30°_FlushEdge_4inch_(Imperial).dxf | CAD Drawing | DXF | 3 MB |
| S400_AngledRollerBelt30°_FlushEdge_4inch_(Metric).dxf | CAD Drawing | DXF | 3 MB |
| S400_AngledRollerBelt30°_FlushEdge_6inch_(Imperial).dxf | CAD Drawing | DXF | 4 MB |
| S400_AngledRollerBelt30°_FlushEdge_6inch_(Metric).dxf | CAD Drawing | DXF | 4 MB |
| S400_AngledRollerBelt30°_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 5 MB |
| S400_AngledRollerBelt30°_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 5 MB |
Split Metal Sprocket
Series 400
Molded Polyurethane Sprocket
Series 400
Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400
Split Low Back Tension Ultra Abrasion Resistant Polyurethane Sprocket
Series 400
Molded Polypropylene Sprocket
Series 400
Molded Tooth Plate Split Polyurethane Composite Sprockets
Series 400
Split Ultra Abrasion Resistant Polyurethane Sprockets
Series 400
HR Nylon Sprockets
Series 400
HR Nylon Split Sprockets
Series 400
Molded Acetal Sprocket
Series 400
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprockets
Series 400
Split Support Wheel
Series 400
Hold Down Tabs
Series 400
Dimensional Requirements for S400 Self-Clearing Finger Transfer Plate Installation
Series 400
Two-Material Finger Transfer Plates
Series 400
Sideguards
Series 400
Finger Transfer Plates
Series 400
Self-Clearing Finger Transfer Plates
Series 400
Open Hinge Base Flights (Streamline/No-Cling)
Series 400
Flush Grid Base Flights (Double No-Cling)
Series 400
Insert Nuts
Series 400
Flat Top Base Flights (Streamline)
Series 400
Flush Grid Base Flights (Streamline/No-Cling)
Series 400
