0-Degree Angled Roller™
Series 400| in | mm | |
| Pitch | 2.00 | 50.8 |
| Minimum Width | 6 | 152 |
| Width Increments | 2.00 | 50.8 |
| Opening Size (approximate) | - | - |
| Open Area | 11% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Barn door; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Uses Activated Roller Belt™ (ARB ™) technology.
- Black or grey polyurethane rollers are available.
- Black polyurethane rollers are not recommended for product accumulations.
- All rollers have an acetal core.
- Axles are stainless steel.
- Rollers are inline with the direction of belt travel.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Designed to run on a flat, continuous carryway. A chevron carryway is not recommended.
- When belt rollers are in motion, product moves faster than the speed of the belt. When belt rollers are not in motion, product travels at belt speed.
- Product behavior varies depending on shape and weight of product, conveyor design, and belt speed.
- Intralox can help you reach a more accurate estimate of product behavior based on product and conveyor characteristics. Contact Intralox Customer Service for more information.
- Custom belts with any combination of 0-degree, 30-degree, 45-degree, or 60-degree angled rollers are available. Custom belts can also include rollers oriented in different directions. Contact Intralox Customer Service for more information.
- 2.0 in (50.8 mm) roller spacing.
- Not compatible with the 4.0 in (102 mm) pitch diameter split sprocket or all 5.2 in (132 mm) pitch diameter sprockets with 2.5 in or 60-mm square bores.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Polypropylene/black polyurethane | Nylon | 1,600 | 23,400 | 34 to 200 | 1 to 93 | 2.65 | 12.94 |
| Polypropylene/grey polyurethane | Nylon | 1,600 | 23,400 | 34 to 120 | 1 to 49 | 2.73 | 13.33 |
Split Metal Sprocket
Series 400
Split Low Back Tension Ultra Abrasion Resistant Polyurethane Sprocket
Series 400
Molded Tooth Plate Split Low Back Tension Polyurethane Composite Sprockets
Series 400
Molded Tooth Plate Split Polyurethane Composite Sprockets
Series 400
Split Ultra Abrasion Resistant Polyurethane Sprockets
Series 400
HR Nylon Sprockets
Series 400
HR Nylon Split Sprockets
Series 400
Molded Sprocket
Series 400
Split Metal with Polyurethane (FDA) Joining Plates Reduced Clearance Sprockets
Series 400
Split Support Wheel
Series 400
Hold Down Tabs
Series 400
Two-Material Finger Transfer Plates
Series 400
Sideguards
Series 400
Finger Transfer Plates
Series 400
Self-Clearing Finger Transfer Plates
Series 400
Open Hinge Base Flights (Streamline/No-Cling)
Series 400
Flush Grid Base Flights (Double No-Cling)
Series 400
Insert Nuts
Series 400
Flat Top Base Flights (Streamline)
Series 400
Flush Grid Base Flights (Streamline/No-Cling)
Series 400
