S8140 Single-Lug Embedded Diamond Top E (11.5 mm) Polyurethane

Series 8140

Ensure exceptional release of sticky or wet products with Intralox Series 8140 Single-Lug Embedded Diamond Top (11.5 mm) belting in polyurethane.

Part of our LugDrive product line, this belting minimizes sink marks for improved yield. It’s an easy drop-in replacement for existing lug-driven belts that delivers an advanced hygienic solution without sacrificing consistency or quality.

The belt is made of a wear-resistant, easy-to-clean polyurethane material. Its Embedded Diamond Top surface’s precise product release reduces carry-over and increases yield, especially for delicate items like leafy greens and confections.

Pair with Intralox ZeroSplice technology to eliminate splicing needs
Homogeneous thermoplastic structure streamlines installation
Lightweight, hinge-free belting improves sanitation
Available with flights, sidewalls, and V-guides
Diamond surface texture prevents product clinging

	in	mm
Pitch	1.562	39.67
Overall Thickness	0.453	11.5
Minimum Width	5	127
Maximum Width	36	914
Minimum Backbend Diameter	5	127
Minimum sprocket Diameter (12T)	6	153
Open Area (seamless surface)	0%
Available Joining Options	prepared ends, endless, metal lace, ThermoLace HDE
Available Colors	blue

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Includes a proven Embedded Diamond Top profile to provide superior release characteristics in applications where product release requirements exceed Flat Top characteristics.
For use with S8140-specific drive and infeed end components
Drive lug width is 3.2 in (81.5 mm)
Available with flights, sidewall, and V-guide
If ThermoLace HDE is the selected joining method, the belt cover thickness is 4 mm. The S8140 ThermoLace HDE cover thickness is 3 mm. This creates a step due to thickness difference.
ThermoLace HDE is Flat Top on each side of the hinge rod.
For continuous use from 20°F (-7°C) to 140°F (60°C) with these exceptions:
- For temperatures over 100°F (38°C), contact Intralox Customer Service with application information.
See Material Compliance for compliance details.

	Maximum Belt Pull Capability¹^,²^,³					Temperature Range (continuous)		Belt Weight
Belt Material	Joining Method	lbf/ft width	N/m width	lbf	N	°F	°C	U.S.	Metric
Polyurethane	Spliced/Endless	400 (up to 18 in)	5,800 (up to 457 mm)	600 (18 in to 36 in)	2,660 (457 mm to 914 mm)	See Product Notes in the previous table.		1.076 lbs/ft² + 0.08 lbs/ft	5.253 kg/m² + 0.119 kg/m
Polyurethane	ThermoLace HDE	225 (up to 32 in)	3,250 (up to 813 mm)	600 (32 in to 36 in)	2,660 (813 mm to 914 mm)	See Product Notes in the previous table.		1.076 lbs/ft² + 0.08 lbs/ft	5.253 kg/m² + 0.119 kg/m

For continuous use over 100°F (38°C), contact Intralox Customer Service for actual belt pull capability.
Based on proper limiter position.
For ThermoLace HDE-specific strength ratings, see S8140 Single-Lug ThermoLace with Heavy-Duty Edge Joining