S8140 Dual-Lug Flat Top E (10.5 mm) Dura

Series 8140

	in	mm
Pitch	1.555	39.5
Overall Thickness	0.413	10.5
Minimum Width	30	762
Maximum Width	60	1,524
Minimum Backbend Diameter	6	153
Minimum Sprocket Diameter (12T)	6	153
Open Area (seamless surface)	0%
Available Joining Options	prepared ends, endless, metal lace, ThermoLace HDE
Available Colors	blue

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Designed for heavy loading in high and low temperatures
Provides notable impact resistance
For use with S8140-specific drive and infeed end components
Drive lug width is 3.1 in (79.5 mm)
Available with flights
For continuous use from -4° F (-20° C) to 140° F (60° C) with these exceptions:
- For temperatures over 140° F (60° C), contact Customer Service with application information.
- For continuous use below -4° F (-20° C), contact Intralox Customer Service for minimum sprocket diameter and other considerations.
See Material Compliance for compliance details.

	Maximum Belt Pull Capability¹^,²^,³			Temperature Range (continuous)		Belt Weight
Belt Material	Joining Method	lbf/ft width	N/m width	°F	°C	U.S.	Metric
Dura	Spliced/Endless	800	11,675	See Product Notes in the previous table.		0.7189 lbs/ft² + 0.208 lbs/ft	3.51 kg/m² + 0.310 kg/m
Dura	ThermoLace HDE	450	6,560	See Product Notes in the previous table.		0.7189 lbs/ft² + 0.208 lbs/ft	3.51 kg/m² + 0.310 kg/m

For continuous use over 100°F (38°C), contact Intralox Customer Service for actual belt pull capability.
Based on proper limiter position.
For ThermoLace HDE-specific strength ratings, see S8140 Dual-Lug ThermoLace with Heavy-Duty Edge Joining.