S8140 Dual-Lug Embedded Diamond Top E (11.5 mm) Polyurethane

Series 8140

Ensure exceptional release of sticky or wet products with Intralox Series 8140 Dual-Lug Embedded Diamond Top (11.5 mm) belting in polyurethane.

Part of our LugDrive product line, this belting minimizes sink marks for improved yield. It’s an easy drop-in replacement for existing lug-driven belts that delivers an advanced hygienic solution without sacrificing consistency or quality.

The belt is made of a wear-resistant, easy-to-clean polyurethane material. Its Embedded Diamond Top surface’s precise product release reduces carry-over and increases yield, especially for delicate items like leafy greens and confections.

Pair with Intralox ZeroSplice technology to eliminate splicing needs
Homogeneous thermoplastic structure streamlines installation
Lightweight, hinge-free belting improves sanitation
Available with flights, sidewalls, and V-guides
Diamond surface texture prevents product clinging

	in	mm
Pitch	1.555	39.67
Overall Thickness	0.453	11.5
Minimum Width	30	762
Maximum Width	60	1,524
Minimum Backbend Diameter	5	127
Minimum sprocket Diameter (12T)	6	153
Open Area (seamless surface)	0%
Available Joining Options	prepared ends, endless, metal lace, ThermoLace HDE
Available Colors	blue

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Includes a proven Embedded Diamond Top profile to provide superior release characteristics in applications where product release requirements exceed Flat Top characteristics.
For use with S8140-specific drive and infeed end components
Drive lug width is 3.1 in (79.5 mm)
Available with flights, sidewall, and V-guide
If ThermoLace HDE is the selected joining method, the belt cover thickness is 4 mm. The S8140 ThermoLace HDE cover thickness is 3 mm. This creates a step due to thickness difference.
ThermoLace HDE is Flat Top on each side of the hinge rod.
For continuous use from 20°F (-7°C) to 140°F (60°C) with these exceptions:
- For temperatures over 100°F (38°C), contact Intralox Customer Service with application information.
See Material Compliance for compliance details.

	Maximum Belt Pull Capability¹^,²^,³			Temperature Range (continuous)		Belt Weight
Belt Material	Joining Method	lbf/ft width	N/m width	°F	°C	U.S.	Metric
Polyurethane	Spliced/Endless	400	5,830	See Product Notes in the previous table.		1.076 lbs/ft² + 0.16 lbs/ft	5.253 kg/m² + 0.238 kg/m
Polyurethane	ThermoLace HDE	225	3,280	See Product Notes in the previous table.		1.076 lbs/ft² + 0.16 lbs/ft	5.253 kg/m² + 0.238 kg/m

For continuous use over 100°F (38°C), contact Intralox Customer Service for actual belt pull capability.
Based on proper limiter position.
For ThermoLace HDE-specific strength ratings, see S8140 Dual-Lug ThermoLace with Heavy-Duty Edge Joining.