LugDrive S8140 Dual-Lug Flat Top E (10.5 mm) Polyurethane
Series 8140| in | mm | ||||
| Pitch | 1.555 | 39.50 | |||
| Overall Thickness | 0.413 | 10.5 | |||
| Minimum Width | 30 | 762 | |||
| Maximum Width | 60 | 1,524 | |||
| Minimum Backbend Diameter | 4 | 102 | |||
| Minimum Forward Bend Diameter | 4 | 102 | |||
| Minimum Sprocket Diameter (8T) | 4 | 102 | |||
| Open Area (seamless surface) | 0% | ||||
| Available Joining Options | prepared ends, endless, metal lace, ThermoLace HDE | ||||
| Available Colors | blue | ||||
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- For use with S8140-specific drive and infeed end components
- Drive lug width is 3.1 in (79.5 mm)
- Available with flights, sidewall, and V-guide
- For continuous use from 20°F (-7 °C) to 140°F (60°C) with these exceptions:
- For temperatures over 100°F (37°C), contact Intralox Customer Service with application information.
- See "Material Compliance" in the ThermoDrive Technology Engineering Manual for compliance details.
| Belt Material | Maximum Belt Pull Capability | Temperature Range (continuous) | Belt Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Joining Method | lbf/ft width | N/m width | °F | °C | U.S. | Metric | |||
| Polyurethane | Spliced/Endless | 400 | 5,830 | See Product Notes in the previous table. | 0.76 lbs/ft2 + 0.16 lbs/ft | 3.711 kg/m2 + 0.238 kg/m | |||
| ThermoLace HDE | 225 | 3,280 | |||||||
