Belt Finder

S8026 Nub Top™ (6.3 mm) Polyurethane

Series 8026
Request a Quote

Prevent product loss and carry-over with the Intralox Series 8026 Nub Top (6.3 mm) belt in polyurethane.

Part of our BarDrive product line, this belting features a full-width drive bar that maximizes belt pull. Its tensionless, positive-drive system reduces downtime and eases maintenance in direct food–contact applications.

The belt is made of a wear-resistant, easy-to-clean polyurethane material. Raised nubs across its surface trap air beneath products, strengthening grip on slight inclines and enabling remarkable release of bulk products.

  • Pair with Intralox ZeroSplice technology to eliminate splicing needs
  • Homogeneous thermoplastic structure streamlines installation
  • Lightweight, hinge-free belting improves sanitation 
  • 0.045-in (1.14-mm) nub height
inmm
Pitch1.00425.50
Overall Thickness0.2386.045
Minimum Width125
Maximum Width24610
Minimum Backbend Diameter2.564
Minimum Sprocket Diameter (6T)2.051
Open Area (seamless surface)0%
Available Joining Optionsprepared ends, endless, ThermoLace HDE
Available Colorsblue

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Provides excellent product grip for moderate incline conveyance; offers superior release of certain products.
  • Available with flights.
  • If considering the 6T sprocket, contact TSG for additional information.
  • ThermoLace HDE is Flat Top on each side of the hinge rod.
  • If ThermoLace HDE is the selected joining method, the belt thickness is 6.3 mm. Th S8026 ThermoLace HDE thickness is 6.0 mm. This creates a step on the underside of the belt due to the thickness difference.
  • Reference the sprocket data tables for lace compatible sprocket options.
  • See Material Compliance for compliance details.

Belt MaterialMaximum Belt Pull Capability1,2,3Temperature Range (continuous)4 Belt Weight
lbf/ft widthN/m width°F°Clb/ft2kg/m2
Polyurethane961,40120 to 140-7 to 600.5332.6

  1. With sprockets spaced on 3 in (76 mm) centers; Consider using stacked sprockets for optimal operational performance in heavily loaded applications

  2. For continuous use over 100°F (38°C), contact Intralox Customer Service for actual belt pull capability.

  3. For ThermoLace HDE-specific strength ratings, see S8026 ThermoLace HDE Joining.

  4. Polyurethane exhibits increased stiffness at temperatures below 40°F (5°C). Not recommended for applications requiring small component diameters with operating temperatures below 40°F (5°C).

Series 8026