S8026 Flat Top E (5.3 mm) Polyurethane
Series 8026Achieve the highest hygienic standards in a variety of direct food–contact applications with the Intralox Series 8026 Flat Top (5.3 mm) belt in polyurethane.
Part of our BarDrive product line, this belting features a full-width drive bar that maximizes belt pull. Its tensionless, positive-drive system reduces downtime and eases maintenance in direct food–contact applications.
Engineered with versatility in mind, the belt is made of a wear-resistant, easy-to-clean polyurethane material. Its smooth surface is ideal for scraper-critical applications. Available in blue or white, this belt reliably performs within a continuous temperature range of 20°F to 140°F (-7°C to 60°C).
- Pair with Intralox ZeroSplice technology to eliminate splicing needs
- Homogeneous thermoplastic structure streamlines installation
- Lightweight, hinge-free belting improves sanitation
| in | mm | ||||
| Pitch | 1.004 | 25.50 | |||
| Overall Thickness | 0.209 | 5.3 | |||
| Minimum Width | 1 | 25 | |||
| Maximum Width | 72 | 1,829 | |||
| Minimum Backbend Diameter | 2.50 | 64 | |||
| Minimum Sprocket Diameter (6T) | 2.0 | 51 | |||
| Open Area (seamless surface) | 0% | ||||
| Available Joining Options | prepared ends, endless, metal lace | ||||
| Available Colors | blue, white | ||||
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Engineered matte surface is optimized for efficient product release and cleanability.
- Available with flights. 7.0 mm thick flights are not recommended for this belt.
- If considering the 6T sprocket, contact TSG for additional information.
- See Material Compliance for compliance details.
| Belt Material | Maximum Belt Pull Capability1 , 2 , 3 | Temperature Range (continuous)4 | Belt Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft width | N/m width | °F | °C | lb/ft2 | kg/m2 | ||||
| Polyurethane | 175 | 2,554 | 20 to 140 | -7 to 60 | 0.57 | 2.78 | |||
With sprockets spaced on 3 in (76 mm) centers; Consider using stacked sprockets for optimal operational performance in heavily loaded applications
For continuous use over 100°F (38°C), contact Intralox Customer Service for actual belt pull capability.
For ThermoLace HDE-specific strength ratings, see S8026 ThermoLace HDE Joining.
Polyurethane exhibits increased stiffness at temperatures below 40°F (5°C). Not recommended for applications requiring small component diameters with operating temperatures below 40°F (5°C).
