Belt Finder

Flat Top

Series 570
Request a Quote

Achieve the tightest dead plate–free transfers in industrial applications with our innovative solution.

Used especially to transport cans and packaged goods, the Intralox Series 570 Flat Top belt features small nosebars that enable the shortest possible transfer gaps. By eliminating the need for dead plates, this belt prevents stranded products and reduces spoilage, optimizing production. Pair it with our pre-assembled nosebar transfer unit to guarantee precise leveling, spacing, and alignment at transfer sites.

  • 0.236-in (6-mm) nosebar transfers
  • Flat Top surface ensures proper product orientation
  • Molded-in arrows on flush edges indicate preferred run direction
  • Cuts sleek can spoilage by 70% compared to dead plate transfers
  • Designed to convey both empty and filled cans
inmm
Pitch0.3158.0
Minimum Width10.0254
Maximum Width621,575
Width Increments1.025.4
Open Area0%
Hinge StyleClosed
Rod Retention; Rod TypeBarn door; unheaded

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Detailed conveyor design guidelines are available. Contact Intralox Customer Service for more information.
  • Smooth, closed upper surface with fully flush edges
  • Small pitch reduces the gap required at the transfer.
  • Detailed material information is provided in Product Line.
  • The preferred run direction for the belt is indicated by the triangle on the top surface of the flush edge.
  • Belt strength depends on the run direction. When the belt is not running in the preferred run direction, the belt strength rating is reduced to 125 lbf/ft (1,824 N/m).
  • Optimized for 0.236 in (6 mm) diameter nosebars and the Intralox Nosebar Transfer Unit.

Belt MaterialDefault Rod Material, Diameter 0.12 in (3 mm)Belt StrengthTemperature Range (continuous)Belt Mass
lbf/ftN/m°F°Clb/ft²kg/m²
AcetalAcetal6008,760-50 to 200-46 to 931.225.96
HSEC acetalAcetal3705,400-50 to 200-46 to 931.256.10

Series 570