S8050 Flat Top E (7.0 mm) Polyurethane

Series 8050

Achieve the highest hygienic standards in a variety of direct food–contact applications with the Intralox Series 8050 Flat Top (7.0 mm) belt in polyurethane.

Part of our BarDrive product line, this belting features a full-width drive bar that maximizes belt pull. Its tensionless, positive-drive system reduces downtime and eases maintenance in heavily loaded, direct food–contact applications.

Engineered with versatility in mind, the belt is made of a wear-resistant, easy-to-clean polyurethane material. Its smooth surface is ideal for scraper-critical applications. Available in blue or white, this belt reliably performs within a continuous temperature range of 20°F to 140°F (-7°C to 60°C).

Pair with Intralox ZeroSplice technology to eliminate splicing needs
Homogeneous thermoplastic structure streamlines installation
Lightweight, hinge-free belting improves sanitation

	in	mm
Pitch	1.956	49.68
Overall Thickness	0.276	7.0
Minimum Width	1	25
Maximum Width	72	1829
Minimum Backbend Diameter	4.0	102
Minimum Sprocket Diameter (6T)	4.0	102
Open Area (seamless surface)	0%
Available Joining Options	prepared ends, endless, ThermoLace HDE, metal lace
Available Colors	blue, white

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Engineered matte surface is optimized for efficient product release and cleanability.
Available with flights and Synchronized Sidewalls.
If considering the 6T sprocket, contact TSG for additional information.
See Material Compliance for compliance details.

Belt Material	Maximum Belt Pull Capability¹^,²^,³				Temperature Range (continuous)⁴			Belt Weight
Belt Material	lbf/ft width		N/m width		°F		°C	lb/ft²	kg/m²
Polyurethane	420		6,129		20 to 140		-7 to 60	0.89	4.35

With sprockets spaced on 3 in (76 mm) centers; Consider using stacked sprockets for optimal operational performance in heavily loaded applications.
For continuous use over 100°F (38°C), contact Intralox Customer Service for actual belt pull capability.
For ThermoLace HDE-specific strength ratings, see S8050 ThermoLace with Heavy-Duty Edge Joining.
Polyurethane exhibits increased stiffness at temperatures below 40°F (5°C). Not recommended for applications requiring small component diameters with operating temperatures below 40°F (5°C).