S8050 Embedded Diamond Top E (7.5 mm) Polyurethane A23

Series 8050

	in	mm
Pitch	1.956	49.68
Overall Thickness	0.296	7.5
Minimum Width	1	25
Maximum Width	48	1219
Minimum Backbend Diameter	5.2	132
Minimum Forward Bend Diameter	6.5	165
Minimum Sprocket Diameter (10T)	6.5	165
Open Area (seamless surface)	0%
Available Joining Options	prepared ends, endless, ThermoLace HDE, metal lace
Available Colors	blue

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Includes a proven Embedded Diamond Top profile to provide superior release characteristics in applications where product release requirements exceed Flat Top characteristics.
Designed to perform well in hydrolysis prone applications.
Available with flights.
For continuous use from 32°F (0°C) to 212°F (100°C) with these exceptions:
- For temperatures over 140°F (60°C), contact Intralox Customer Service with application information.
- For use below 32°F (0°C), contact Intralox Customer Service for minimum sprocket diameter and other considerations.
ThermoLace HDE is Flat Top on each side of the hinge rod.
If ThermoLace HDE is the selected joining method, the belt thickness is 7.5 mm. The S8050 ThermoLace HDE thickness is 7.0 mm. This creates a step due to thickness difference.
See "Material Compliance" in the ThermoDrive Technology Engineering Manual for compliance details.