S4030 7.5-in ProTrax™ Sideflexing Flat Top with Tabs
Series 4000Overcome challenging conditions in pan-area applications with a powerful, magnetic solution.
Intralox 4000 Series ProTrax belting uses two rare earth magnets to handle a variety of straight-running or radius applications. Specially designed for bakery plants, this breakthrough solution extends belt and pan life for many common pan-area applications, including pan inclines and declines, metering conveyors, depanners/de-lidders, and radius pan conveyors.
- Dual magnetic modules retain strength in hot, dry, and oily environments, reducing downtime and eliminating pan jams
- Reduces risk of product contamination
- Increases versatility in pan conveyance
- Available with hold down tabs
| in | mm | |
| Pitch | 1.00 | 25.4 |
| Molded Width | 7.5 | 191.0 |
| Open Area | 0% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Press fit; knurled pin | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Two powerful, blue, Teflon™-coated magnets are embedded in each module (one magnet per wing). Contact Intralox Customer Service for guidance on how temperature affects magnet strength.
- Blue, metal-detectable, nylon caps retain magnets in modules.
- Hold down tabs match dimensions of S4090.
- Thicker deck than Series 409X Flat Top for increased wear resistance.
- Standard configuration consists of alternating rows of magnetic modules and Series 403X Sideflexing Flat Top modules.
- Detailed material information is provided in Product Line.
- Uses the same sprockets as S1400 and S4000.
- Needs only one drive sprocket and one idle sprocket per belt strand.
- Determine belt spacing based on maximum surface contact with the bottom surface of the conveyed product.
- Ideal for incline, decline, vertical switch, and other applications.
- Minimum sprocket pitch diameter: 3.9 in (99.0 mm).
| Belt Material | Belt Width | Default Rod Material, Diameter 0.25 in (6.4 mm) | Belt Strength | Temperature Range (continuous) | Belt Mass | Minimum Centerline Turn Radius | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| in | mm | lbf | N | °F | °C | lb/ft | kg/m | in | mm | ||
| HHR nylon | 7.5 | 191 | Stainless steel | 500 | 2,220 | -50 to 310 | -46 to 154 | 2.44 | 3.63 | 24 | 610 |
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| ProTrax Radius Belting Product Highlight | 872 KB |
Machined Acetal Sprockets
Series 4000
Polypropylene Composite Split Sprockets
Series 4000
Molded HR Nylon Sprockets
Series 4000
Molded Nylon Sprockets
Series 4000
Polyurethane Composite Split Sprockets
Series 4000
Molded Sprockets
Series 4000
Glass-Filled Nylon Split Sprockets
Series 4000
Nylon (FDA) Split Sprockets
Series 4000
