Simplify your single-lane conveyors with the Intralox S4014 Flat Top belt.

The S4014 Flat Top belt has the same deck thickness as our straight-running S1400 Flat Top belt, enabling seamless product transfers between belts. Used especially in the beverage industry, it has a closed surface to prevent product loss and its modular plastic design eases maintenance.

  • 0.5-in (12.7-mm) thick deck—identical to S1400 Flat Top belting
  • 3.3-in (84-mm) molded width
  • Built to run on 85-mm width tracks
inmm
Pitch1.0025.4
Molded Width3.384
Open Area0%
Hinge StyleClosed
Rod Retention; Rod TypePress fit; knurled pin

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Same deck thickness as the straight-running belt counterpart, S1400 Flat Top: 0.5 in (12.7 mm).
  • Detailed material information is provided in Product Line.
  • Uses S1400 sprockets
  • All S1400 and S4000 sprockets are split, so shafts do not have to be removed for retrofits and changeovers.
  • Use the Intralox Engineering Program to calculate the estimated belt pull for your application. Contact Intralox Customer Service for more information.
  • Corner tracks, with bevel design, are mandatory on the inside edges of all turns.
  • Available in 10 ft (3 m) increments
  • Designed to run in 85-mm width increment tracks. Contact Intralox Customer Service for track design drawings.

Belt MaterialBelt WidthDefault Rod Material, Diameter 0.25 in (6.4 mm)Belt StrengthTemperature Range (continuous)Belt MassMinimum Centerline Turn Radius
inmmlbfN°F°Clb/ftkg/minmm
Acetal3.384Stainless steel5002,220-50 to 200-46 to 931.291.9218457