Overcome height restrictions or limited floor space in spiral applications with the Intralox S2950 DirectDrive Stacker belt.
Part of our advanced DirectDrive System, the S2950 DirectDrive Stacker belt engages directly with the drum, aligning and securing products from infeed to outfeed. Its compact design easily accommodates short or low-profile items, and built-in sideguards ensure product containment.
- Direct belt engagement reduces friction and eliminates overdrive
- Modular construction simplifies cleaning
- 44% open area when fully extended
| in | mm | |
| Pitch | 1.5 | 38.1 |
| Minimum Width | 12 | 304.8 |
| Width Increments | 1.0 | 25.4 |
| Opening Size (approximate) | 0.52 x 0.39 | 13 x 10 |
| Open Area (fully extended) | 44% | |
| Minimum Open Area | 26% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Lightweight, strong belt with smooth surface grid for good product release.
- Belt openings pass straight through the belt to simplify cleaning.
- Relatively uniform open area across the width of the belt to aid product freezing and cooling.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Sideplates are permanently installed and cannot be replaced.
- Designed for stacker applications using patented DirectDrive technology.
- Tier spacing: available in 60 mm, 80 mm, 100 mm, 120 mm, and 167 mm.
- Contact Intralox for a spiral analysis and the preferred run direction on spiral applications.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength | Spiral Belt Strength1 | Temperature Range (continuous)2 | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | lbf | N | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Acetal | 1,600 | 23,400 | 475 | 2,110 | -50 to 200 | -46 to 93 | 2.18 | 10.64 |
Intralox engineers are available to provide an accurate comparison of spiral belt strengths. Contact Intralox Customer Service for more information.
Sideflexing applications must not exceed 180°F (82°C).
