Eliminate conventional belt issues in spiral applications with our friction-driven solution.
A remarkable retrofit option for capstan drive systems, the Intralox Series 2900 Spiral 1.6 belt features a modular plastic design that ensures easy maintenance and cleanability. Its robust outside edge protects against premature fatigue failures, while its modular construction enables simple, quick repairs.
- Performs within a continuous temperature range of -50°F to 200°F (-46°C to 93°C)
- Minimum turn radius of 1.6 times belt width
- Open area aids product freezing and cooling
| in | mm | |
| Pitch | 1.5 | 38.1 |
| Minimum Width (See Product Notes.) | 13.5 | 343 |
| Maximum Width (See Product Notes.) | 61.7 | 1567 |
| Width Increments | 0.5 | 12.7 |
| Opening Size (approximate) | 0.52 x 0.39 | 13 x 10 |
| Open Area (fully extended) | 44% | |
| Minimum Open Area | 26% | |
| Hinge Style | Open | |
| Rod Retention; Rod Type | Occluded edge; unheaded | |
- This belt has pinch points. See the Safety section in the Intralox Conveyor Belting Installation, Maintenance & Troubleshooting Manual for more information.
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Belt openings pass straight through the belt to simplify cleaning.
- Relatively uniform open area across the width of the belt aids product freezing and cooling.
- Robust edge feature adds strength to the outside edge of the belt.
- Cage-friendly inside edge and frame-friendly outside edge
- Enhanced beam stiffness.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Eliminates product contamination from metal-wear debris.
- Enables simple, quick repairs and changeovers.
- Designed for friction drive, capstan drive spiral applications with a minimum turn radius of 1.6 times the belt width (measured from the inside edge).
- Contact Intralox for a spiral analysis and the preferred run direction on spiral applications.
- Minimum sprocket indent from the inside belt edge and from the outside belt edge can vary. Contact Intralox Customer Service to determine exact placement.
| Belt Material | Default Rod Material, Diameter 0.24 in (6.1 mm) | Straight Belt Strength | Spiral Belt Strength1 | Temperature Range (continuous) | Belt Mass | ||||
|---|---|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | lbf | N | °F | °C | lb/ft² | kg/m² | ||
| Acetal | Acetal | 1,600 | 23,400 | 475 | 2,110 | -50 to 200 | -46 to 93 | 1.78 | 8.69 |
| SELM | Acetal | 500 | 7,300 | 375 | 1,670 | -50 to 200 | -46 to 93 | 1.46 | 7.13 |
| Detectable MX | Detectable MX | 1,600 | 23,400 | 475 | 2,110 | -50 to 200 | -46 to 93 | 2.08 | 10.16 |
Intralox engineers are available to provide an accurate comparison of spiral belt strengths. Contact Intralox Customer Service for more information.
