Radius Friction Top with Heavy-Duty Edge

Series 2400

Securely grip products on incline and decline conveyors with the Intralox Series 2400 Radius Friction Top with Heavy-Duty Edge (HDE) belt.

Part of the industry’s most dependable radius series, the S2400 Radius Friction Top HDE belt features high-friction modules that reduce product slippage. It has a Load-Sharing edge that distributes stress to minimize fatigue failures, and molded-in arrows on edges that indicate proper run direction.

Smaller belt edge opening area reduces catchpoints
Fault-tolerant edge design protects against edge breakage
Greater open area offers superior cleanability
Friction Top surface improves product orientation and stability

	in	mm
Pitch	1.0	25.4
Minimum Width	4.0	101.6
Width Increments	0.50	12.7
Opening Size (approximate)	0.35 x 0.30	8.9 x 7.6
Open Area	42%
Product Contact Area	23%
Hinge Style	Open
Rod Retention; Rod Type	Occluded edge; unheaded

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Heavily reinforced and carefully sculpted edge is designed to resist belt snagging and edge damage while maintaining cleanability.
Load-Sharing^™ belt edge improves how the load is shared and minimizes belt fatigue failure.
Belt openings pass straight through the belt to simplify cleaning.
Available in grey polypropylene with grey rubber, white polypropylene with white rubber, and blue polypropylene with high-performance blue rubber.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Sprocket drive system minimizes wear and requires low return-side tension.
Contact Intralox Customer Service before using a belt wider than 36 in (914 mm) in flat-turning or spiral applications.
Designed for radius applications with a turn radius of 2.2 times the belt width.
Temperature, environmental conditions, and product characteristics affect the maximum degree of incline. Consider these factors when designing conveyor systems using these belts.
Available with hold down guides.
Indent for friction surface: 1.125 in (28.6 mm).
Minimum nosebar diameter: 1.375 in (34.9 mm).

Base Belt Material	Base/Friction Top	Default Rod Material, Diameter 0.18 in (4.6 mm)	Belt Strength		Curved Belt Strength	Temperature Range (continuous)		Belt Mass		Friction Top Hardness	Agency Acceptability
Base Belt Material	Base/Friction Top	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf/ft	N/m	Curved Belt Strength	°F	°C	lb/ft²	kg/m²	Friction Top Hardness	FDA (USA)	EU MC¹
Polypropylene	Grey/grey	PK	1,200	17,500	For curved belt strength calculations, contact Intralox Customer Service.	34 to 150	1 to 66	1.29	6.30	64 Shore A
Polypropylene	White/white	PK	1,200	17,500		34 to 150	1 to 66	1.29	6.30	55 Shore A	²	³
Polypropylene	Blue/high-performance FT blue	PK	1,200	17,500		34 to 176	1 to 80	1.35	6.59	59 Shore A	²	³

European Migration Certificate providing approval for food contact according to EU Regulation 10/2011.
FDA compliant with restriction: Do not use in direct contact with fatty foods.
EU compliant with restriction: Do not use in direct contact with fatty foods.