Radius Flush Grid with Load-Sharing™ Edge

Series 2400

Streamline cleaning and accelerate cooling with the Intralox Series 2400 Radius Flush Grid with Load-Sharing Edge belt.

Part of the industry’s most dependable radius series, this belt has a large open area for easy cleaning and quick product cooling. Its Load-Sharing edge distributes stress to minimize fatigue failures, while its modular plastic design ensures straightforward installation and maintenance.

42% open area provides even airflow for fast product cooling
Minimum turn radius of 2.2 times belt width
Load-Sharing edge extends belt life
Available with hold down guides

	in	mm
Pitch	1.00	25.4
Minimum Width	10.5	266.7
Maximum Width	36	914
Width Increments	0.5	12.7
Opening Size (approximate)	0.35 x 0.30	8.9 x 7.6
Open Area	42%
Product Contact Area	23%
Hinge Style	Open
Rod Retention; Rod Type	Occluded edge; unheaded

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Belt openings pass straight through the belt to simplify cleaning.
Flush edge design features an extension to reduce the opening size.
Load-Sharing™ belt edge improves how the load is shared and minimizes fatigue failure in various areas of the belt.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Sprocket drive system minimizes wear and requires very low return-side tension.
Designed for radius applications with a turn radius of 2.2 times the belt width.
Temperature, environmental conditions, and product characteristics affect the maximum degree of incline. Consider these factors when designing conveyor systems using these belts.
Available with hold down guides.
Radius belt wearstrips are available.
Minimum nosebar diameter: 1.5 in (38 mm) with hold down guides and 1.375 in (34.9 mm) without hold down guides.

Base Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Straight Belt Strength		Curved Belt Strength	Temp. Range (continuous)¹		Belt Mass
Base Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf/ft	N/m	Curved Belt Strength	°F	°C	lb/ft²	kg/m²
Polypropylene	Acetal	1,200	17,500	For curved belt strength calculations, contact Intralox Customer Service.	34 to 200	1 to 93	1.10	5.37
Acetal	Nylon	1,700	24,800		-50 to 200	-46 to 93	1.59	7.76
Polypropylene	Polypropylene	1,000	14,600		34 to 200	1 to 104	1.04	5.10
X-ray detectable acetal	X-ray detectable acetal	1,700	24,800		-50 to 200	-46 to 93	1.85	9.03