Belt Finder

Radius Flush Grid MTW with Load-Sharing™ Edge

Series 2400
Request a Quote
inmm
Pitch1.0025.4
Minimum Width4.0101.6
Opening Size (approximate)0.35 x 0.308.9 x 7.6
Open Area42%
Hinge StyleOpen
Rod Retention; Rod TypeSnap-lock; headed

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Flush edge design features an extension to reduce the opening size.
  • Load-Sharing™ belt edge improves how the load is shared and minimizes belt fatigue failure.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • Designed for sideflexing applications with a standard turn ratio of 2.2 times the belt width.
  • Minimum recommended turn ratio is 1.95. Consult Intralox Customer Service when considering minimum turn ratio.
  • Temperature, environmental conditions, and product characteristics affect the maximum degree of incline. Consider these factors when designing conveyor systems using these belts.
  • Available with hold down guides
  • Radius belt wearstrips are available.
  • Available widths: 4 in (101.6 mm), 6 in (152.4 mm), 8 in (203.2 mm), and 10 in (254 mm).
  • For 4 in (102 mm) wide belts with hold down guides, do not use glass-filled nylon split sprockets.
  • Maximum number of sprockets for 4 in (101.6 mm) belts:
    • without hold down guides: two
    • with hold down guides: one
  • Maximum number of sprockets for 6 in (152.4 mm) belts:
    • without hold down guides: four.
    • with hold down guides: three.
  • Maximum number of sprockets for 8 in (203.2 mm) belts with and without hold down guides: five.
  • Maximum number of sprockets for 10 in (254 mm) belts with and without hold down guides: seven.
  • Minimum nosebar diameter for belts:
    • without hold down guides: 1.375 in (34.9 mm)
    • with hold down guides: 1.50 in (38.1 mm).

Base Belt MaterialDefault Rod Material, Diameter 0.18 in (4.6 mm)Hold Down GuidesStraight Belt Strength lbf (N)Curved Belt StrengthTemp. Range (continuous)Belt Mass lb/ft (kg/m)
4 in (101.6 mm)6 in (152.4 mm)8 in (203.2 mm)10 in (254 mm)°F°C4 in (101.6)6 in (152.4)8 in (203.2)10 in (254)
AcetalNylonWithout 484 (2,150)850 (3,780)1,133 (5,040)1,417 (6,300)For curved belt strength calculations, contact Intralox Customer Service.-50 to 200-46 to 930.57 (0.85)0.89 (1.32)1.19 (1.77)1.50 (2.23)
With242 (1,080)726 (3,230)1,133 (5,040)1,417 (6,300)-50 to 200-46 to 930.64 (0.95)0.96 (1.42)1.26 (1.88)1.56 (2.32)
PolypropyleneNylonWithout400 (1,780)600 (2,670)800 (3,560)1,000 (4,450)34 to 2201 to 1040.39 (0.58)0.60 (0.89)0.82 (1.22)1.01 (1.50)
With 242 (1,080)600 (2,670)800 (3,560)1,000 (4,450)34 to 2201 to 1040.43 (0.64)0.65 (0.978)0.86 (1.28)1.06 (1.58)

Series 2400