Radius Flush Grid (2.8) with Insert Rollers

Series 2400

Ensure safe accumulation of lightweight products with the Intralox Series 2400 Radius Flush Grid (2.8) with Insert Rollers belt.

This belt has inline acetal rollers that enable damage-free accumulation of lightweight products or loads. Its modular plastic design ensures straightforward installation and maintenance, while its large open area simplifies cleaning.

42% open area
Minimum turn radius of 2.8 times belt width
Available in acetal or polypropylene

	in	mm
Pitch	1.00	25.4
Minimum Width	6	152
Width Increments	1.00	25.4
Opening Size (approximate)	0.35 × 0.30	8.9 × 7.6
Open Area	42%
Product Contact Area	23%
Hinge Style	Open
Rod Retention; Rod Type	Occluded edge; unheaded

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
This belt uses the Series 2400 Radius Flush Grid (2.2) as a base. Due to roller placement, turn radius increases to 2.8.
For low back-pressure applications, place wearstrips between rollers. For driven applications, place wearstrips under rollers.
Do not place sprockets in-line with rollers.
For radius applications requiring low back-pressure accumulation with a minimum radius of 2.8 times belt width (measured from inside edge).
Contact Intralox Customer Service before using a belt width greater than 24 in (610 mm) in flat-turning or spiral applications.
Standard roller row spacing: 2 in (51 mm) or 4 in (102 mm).
Standard roller width spacing: 2 in (51 mm), 3 in (76 mm), or 4 in (102 mm).
Minimum width with hold down guides: 8 in (203 mm).
Roller indents: 2 in (51 mm), 2.5 in (63 mm), 3 in (76 mm), or 3.5 in (89 mm) based on roller width spacing.
Minimum roller indent with hold down guides: 3 in (76 mm).

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Straight Belt Strength						Roller Indents		Curved Belt Strength	Temp. Range (continuous)		Belt Mass
		Roller Width Spacing
		2 in	51 mm	3 in	76 mm	4 in	102 mm
		lbf/ft	N/m	lbf/ft	N/m	lbf/ft	N/m	in	mm		°F	°C	lb/ft²	kg/m²
Polypropylene	Acetal	700	10,200	800	11,700	900	13,100	2	51	For curved belt strength calculations, contact Intralox Customer Service.	34 to 200	1 to 93	1.21	1.21
Polypropylene	Acetal	700	10,200	800	11,700	900	13,100	2.5 to 3.5	64 to 89		34 to 200	1 to 93	1.21	1.21
Acetal	Nylon	1,000	14,600	1,200	17,500	1,300	12,749	2	51		-50 to 200	-46 to 93	1.61	7.68
Acetal	Nylon	1,000	14,600	1,200	17,500	1,300	12,749	2.5 to 3.5	64 to 89		-50 to 200	-46 to 93	1.61	7.68
Polypropylene	Polypropylene	600	8,760	700	10,200	800	11,700	2	51		34 to 220	1 to 104	1.04	5.11
Polypropylene	Polypropylene	600	8,760	700	10,200	800	11,700	2.5 to 3.5	64 to 89		34 to 220	1 to 104	1.04	5.11