Mold to Width Radius Flush Grid 2.2

Series 2400

Streamline cleaning and accelerate cooling with the Intralox Series 2400 Mold to Width Radius Flush Grid 2.2 belt.

This belt has a large open area for easy cleaning and quick product cooling, and its modular plastic design ensures straightforward installation and maintenance. Available in acetal or polypropylene, this belt adds value across many applications.

4-in (101.6-mm) molded width
42% open area provides even airflow for fast product cooling
Minimum turn radius of 2.2 times belt width
Available with hold down guides

	in	mm
Pitch	1.00	25.4
Molded Width	4	101.6
Opening Size (approximate)	0.35 x 0.30	8.9 x 7.6
Open Area	42%
Hinge Style	Open
Rod Retention; Rod Type	Snap-lock; headed

Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
Belt openings pass straight through the belt to simplify cleaning.
Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
Detailed material information is provided in Product Line.
Sprocket drive system minimizes wear and requires low return-side tension.
Available with hold down guides, see Hold Down Guides (2.2 Only) for details.
Hold down guides cannot be used with 2 in and 2.9 in pitch diameter sprockets or 3.9 in pitch diameter square bore sprockets.
Radius belt wearstrips are available.
Minimum nosebar diameter: 1.5 in (38.1 mm) with hold down guides and 1.375 in (34.9 mm) without hold down guides.

Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	Straight Belt Strength		Curved Belt Strength	Temp. Range (continuous)		Belt Mass
Belt Material	Default Rod Material, Diameter 0.18 in (4.6 mm)	lbf	N	Curved Belt Strength	°F	°C	lb/ft	kg/m
Acetal	Nylon	560	2,490	For curved belt strength calculations, contact Intralox Customer Service.	-50 to 200	-46 to 93	0.56	0.83
Polypropylene	Acetal	400	1,780		34 to 200	1 to 93	0.39	0.57