Belt Finder

Flush Grid High Deck with Edge Bearing

Series 2400
Request a Quote

Prevent product snagging or disorientation in high-speed, heavily loaded applications with the Intralox Series 2400 Flush Grid High Deck with Edge Bearing belt.

This belt allows products to extend beyond its width without snagging. Part of the industry’s most dependable radius series, it excels in high-speed, heavily loaded applications thanks to stainless-steel edge bearings.

  • Minimum turn radius of 2.2 times belt width
  • High Deck style ensures packages clear hold down wearstrips
  • 42% open area for improved cleanability
  • Edge bearings exclusive to turning belts
inmm
Pitch1.0025.4
Minimum Width (Bearings One Side)7.5191
Minimum Width (Bearings Both Sides)9.0229
Maximum Width36914
Width Increments0.512.7
Opening Size (approximate)0.35 x 0.308.9 x 7.6
Open Area42%
Product Contact Area23%
Hinge StyleOpen
Rod Retention; Rod TypeOccluded edge; unheaded

  • Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
  • Occluded edge rod retention allows for easier insertion and removal of rods.
  • Edge bearings are only available for turning belts.
  • Edge bearings are available on one side (for belts that turn in only one direction) or on both sides (for belts that turn in both directions). Bearings must be placed on the inside edge of the turn, and must be configured in every other row of the belt.
  • Edge bearings are stainless steel and are retained by plastic pins.
  • Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
  • Detailed material information is provided in Product Line.
  • Designed for radius applications with a turn radius of 2.2 times the belt width.
  • Belt height: 0.4 in (10 mm) higher than standard S2400 belt.
  • Standard indent: 1.88 in (47.75 mm).

Base Belt MaterialDefault Rod Material, Diameter 0.18 in (4.6 mm)Straight Belt StrengthCurved Belt StrengthTemp. Range (continuous)1Belt Mass
lbf/ftN/m°F°Clb/ft²kg/m²
AcetalNylon1,70024,800For curved belt strength calculations, contact Intralox Customer Service.0 to 200-18 to 932.8313.82

  1. Sideflexing applications must not exceed 180°F (82°C).

Series 2400