Overcome difficult conditions in harsh applications like potato receiving or dip tank lines with the Intralox Series 1700 Flush Grid Nub Top belt.
Using abrasion-resistant hinges, rods, and sprockets, this belt extends service life and reduces maintenance costs through its durable construction. Its 37% open area provides efficient drainage of fluids such as slurry or wash water, while its 8% product contact area enables optimal backside coverage.
- Raised 0.12-in (3.2-mm) nubs provide minimal contact between product and belt
- Slidelox rod retention system eases maintenance
- Double-rod design replaces sliding friction between hinges and modules with rolling friction, significantly reducing wear
- Available in Low Wear Plus material for superior wear resistance
- Available in FDA-compliant nylon material
- Compatible with Series 1700 Intralox belt tensioners
| in | mm | |
| Pitch | 1.50 | 38.1 |
| Minimum Width | 16 | 406.4 |
| Width Increments | 1.00 | 25.4 |
| Opening Size (approximate) | 0.70 × 0.26 | 18 × 7 |
| Open Area | 37% | |
| Product Contact Area | 8% | |
| Hinge Style | Closed | |
| Rod Retention; Rod Type | Slidelox; unheaded | |
- Contact Intralox for precise belt measurements and stock status before designing equipment or ordering a belt.
- Fully flush edges.
- Slidelox are highly visible, orange acetal.
- Multi-rod hinge design significantly reduces cam shaft requirements. Every row contains two rectangular rods.
- Each belt material has a default rod material. Other rod materials are available. Intralox can help identify the best belt and rod material combination for your application.
- Detailed material information is provided in Product Line.
- Ultra-abrasion-resistant, polyurethane split sprockets with large lug teeth.
- Abrasion resistant system lasts 2.5 to 3 times longer than conventional modular plastic belts.
- Provides excellent belt and sprocket durability, especially in tough-material handling applications.
- Conveyor requirements: Intralox recommends steel carryways with either a chevron pattern or a flat continuous carryway. Do not use straight, parallel wearstrips. Do not use on pusher conveyors.
- Minimum nominal alternating edge indents: 4 in (102 mm) and 6 in (152 mm).
- Compatible with Intralox belt tensioners. See Intralox Belt Tensioners for more information.
| Belt Material | Default Rod Material 0.25 × 0.17 in (6.4 × 4.3 mm) | Belt Strength | Temperature Range (continuous)1 | Belt Mass | |||
|---|---|---|---|---|---|---|---|
| lbf/ft | N/m | °F | °C | lb/ft² | kg/m² | ||
| Nylon (FDA) | Nylon | 1,800 | 26,300 | -50 to 240 | -46 to 116 | 2.21 | 10.78 |
| Easy Release Traceable PP | Nylon | 1,500 | 21,900 | 34 to 220 | 1 to 104 | 1.84 | 8.98 |
| Low Wear Plus | Low Wear Plus | 500 | 7,300 | 0 to 120 | -18 to 49 | 2.58 | 12.60 |
Sprocket temperatures must be limited to -40°F to 160°F (-40°C to 70°C). Belts used in temperature range of 212°F to 240°F (100°C to 116°C) are not FDA-compliant.
| Document Name | Document Type | File Type | File Size |
|---|---|---|---|
| Intralox Tensioner Instructions (Series 1700) | 1 MB | ||
| S1700_FlushGridNubTop_Interior_6inch_(Imperial).dxf | CAD Drawing | DXF | 563 KB |
| S1700_FlushGridNubTop_Interior_6inch_(Metric).dxf | CAD Drawing | DXF | 619 KB |
| Series 1700 Flush Grid Nub Top for Dip Tanks Application Highlight | 626 KB |
